| DFX Program Listing | Setting |
| Default Program is: | |
| EEPROM HI-PRO | |
| Change only these settings: | |
| Volume | 63 |
| Threshold | 7 |
| (Depends on how good your | |
| headphones are.) | |
| Tone | 231 |
| AC Sensitivity | 75 |
| (You can try more on this | |
| but you have to judge your | |
| stability in your area. 80 or 85 | |
| would be nice depending on | |
| ground conditions.) | |
| Ratchet Pinpointing | ON |
| Reject | +95 |
| (You are just rejecting plus | |
| 95 in the existing | |
| discrimination pattern.) | |
| Recovery Speed | 15 |
| Bottle Cap Reject | 1 |
| Hot Rock Reject | 20 |
| Sweep Speed | 1 |
| Ground Filters | 6 |
| Visual Discrimination | ON |
| Icons | OFF |
| VDI Sensitivity | 86 |
| Preamp Gain | 4 |
This is a good program to start with. If the area you are hunting in is relatively trash free this will work great. You can switch to 3kz if you're looking for silver and not worried about rings and nickels. If you hit heavy iron or trash however you will need to bump up your Recovery Speed to 20 or 30. Lower your Filters, 3 to 5, drop the AC Sensitivity to about 70. This will get you through the trash fairly well until the smaller coils get out.
Please note this on discrimination pattern. Reject -95 to -71.
Accept -70 to +94,
Still Reject +95 as stated above..
Back to the DFX Classroom Forum
Copyright © 2001 Find Electronics. All rights reserved.
Revised: September 11, 2004.