Findmall.com
 
 






Makro Detectors Forum


Welcome! Log In Register
Racer standard MD question
Posted by: oleterryg
Date: January 20, 2017 07:28PM
Does the Racer Standard MD show the depth on the visual screen?
For the life of me I can't find any info.

Re: Racer standard MD question
Posted by: Parkologist
Date: January 20, 2017 09:44PM
It does in cm or inches when pinpointing. On the fly the modulated audio and signal strength bar on id chart paint a pitcher for you as far as shallow vs deeper



Edited 1 time(s). Last edit at 01/20/2017 09:45PM by Parkologist.

Re: Racer standard MD question
Posted by: oleterryg
Date: January 20, 2017 10:31PM
Thank you for your reply and info. Getting better all the time.
Excited to be taking delivery on my Racer on Wednesday.

Re: Racer standard MD question
Posted by: oleterryg
Date: January 21, 2017 02:24PM
Do you find the PP and depth numbers to be fairly accurate?

Re: Racer standard MD question
Posted by: TallTom
Date: January 21, 2017 07:29PM
Quote
oleterryg
Do you find the PP and depth numbers to be fairly accurate?

Yes, BUT you have to remember that the depth is calibrated for a one-inch coin,
which is the size of a U.S. quarter. So you have to mentally adjust the number
for a different sized coin.

For example, if you get an ID of 84, that's typically a dime or copper penny (not zinc).
But that's smaller than a quarter, so if the depth is shown as three inches, it's probably
only one or two inches deep.

Even so, the depth is only an estimate. Once in a while it's not very close to accurate,
but generally I've found it to be fairly close.



In So. Calif. using Nokta Impact, Makro Racer, Tesoro Vaquero, and Tesoro Sand Shark.

Re: Racer standard MD question
Posted by: oleterryg
Date: January 21, 2017 08:10PM
Thanks TallTom. I didn't know that, so I do now. Very important.

Sorry, only registered users may post in this forum.

Click here to login