Findmall.com
 
 






Makro Detectors Forum


Welcome! Log In Register
Racer 2 notching
Posted by: foxhunter
Date: February 21, 2017 08:54PM
Thinking on getting the racer 2.. Wondering how far up the scale can I notch something in or out. I would like to notch in a certain item like let's say just .25 's.

Re: Racer 2 notching
Posted by: TallTom
Date: February 22, 2017 12:44AM
Quote
foxhunter
Thinking on getting the racer 2.. Wondering how far up the scale can I notch something in or out. I would like to notch in a certain item like let's say just .25 's.

The Racer 2 can notch out any or all numbers all the way up to 99.
No limit.



In So. Calif. using Nokta Impact, Makro Racer, Tesoro Vaquero, and Tesoro Sand Shark.

avatar
Re: Racer 2 notching
Posted by: Stoof-tabsallday
Date: February 22, 2017 02:40PM
Yes Tom is correct. You can notch out only certain numbers or actually pairs of numbers. There are 50 bars, each representing 2 numbers. Since most targets will at least bounce up and down between 2 numbers, it works out. You can wave a specific target and see what number(s) it reads and then go in and notch out those numbers.



Stefan (Michigan)

Nokta Fors Relic 7x11", 5.5x10"DD, 5", 5.5x10 Concentric


Makro Racer 2 - 7x11", 5.5x10", 5" DD


:tesoro: Mojave
:tesoro: Deleon - Troy shadow super 7",
:tesoro: Compadre 8
:tesoro: Compadre 5.75
:tesoro: Bandido II Micromax
:tesoro: Outlaw
:tesoro: Cibola- GB/all metal toggle mod
:tesoro: Vaquero
:tesoro: Cutlass Micromax 8

Lots of coils

*Not listed in any special order*

Tools:
Garrett carrot, lesche shovel, Killer B Wasps, my bare hands

avatar
Re: Racer 2 notching
Posted by: Stoof-tabsallday
Date: February 22, 2017 02:46PM
If you go to makros site, you can download the PDF of the manual. I have them on my phone for all my detectors in case I need to reference them.
I also got them when I ordered my machines and waiting for them to arrive so I was more familiar when I received them and got out swinging quicker once they arrived.



Stefan (Michigan)

Nokta Fors Relic 7x11", 5.5x10"DD, 5", 5.5x10 Concentric


Makro Racer 2 - 7x11", 5.5x10", 5" DD


:tesoro: Mojave
:tesoro: Deleon - Troy shadow super 7",
:tesoro: Compadre 8
:tesoro: Compadre 5.75
:tesoro: Bandido II Micromax
:tesoro: Outlaw
:tesoro: Cibola- GB/all metal toggle mod
:tesoro: Vaquero
:tesoro: Cutlass Micromax 8

Lots of coils

*Not listed in any special order*

Tools:
Garrett carrot, lesche shovel, Killer B Wasps, my bare hands

avatar
Re: Racer 2 notching
Posted by: Sataro
Date: February 23, 2017 03:15AM
As others have mentioned this is possible & very simple to setup like you want it...



Nokta Impact | Whites MXT Pro | Tesoro Vaquero | Tesoro Cibola | Lesche Digger | Garrett Pro-Pointer | Deteknix Xpointer

Re: Racer 2 notching
Posted by: Bill_S
Date: February 26, 2017 05:42PM
One thing is you can only use notch above the discrimination point. If you set your discrimination at 60 you would only be able to use the notch feature on numbers higher than 60

Re: Racer 2 notching
Posted by: foxhunter
Date: March 04, 2017 08:07PM
thanks to all

Sorry, only registered users may post in this forum.

Click here to login