Findmall.com
 
 






Minelab Excalibur & Sovereign Forum


Welcome! Log In Register
Re: Where can I get an upper shaft for a Sovereign GT?
Posted by: Daniel Tn
Date: January 31, 2017 09:57PM
I bought a GT that was just the coil and box. So I had to search for the other stuff to make it useable. I wanted a straight shaft for mine and ended up buying the Anderson gold model for mine. This will get you the shaft and grip like what you are wanting. You will still have to track down a set of arm cuffs and the mount, and a lower rod. I got both on eBay but was able to use a spare lower rod from a Nokta detector and it worked perfect. Plugger also makes a rod for the Sovereign that comes with a cuff on it...his are hipmount rods though. You will be able to bypass the mount but have to get some kind of bag to hold the control box. OR you can get the arm cuff replacement for a GPX detector, and then get the detector mount...and that will enable the hipmount shaft to be used like a normal straight rod. I think the standard Minelab rod and cuff is around $50 or so. The others are a little more expensive.


SubjectAuthorViewsPosted

Where can I get an upper shaft for a Sovereign GT?

Ohio Coinhunter451January 29, 2017 07:04PM

Re: Where can I get an upper shaft for a Sovereign GT?

Ohio Coinhunter201February 01, 2017 11:41PM

Re: Where can I get an upper shaft for a Sovereign GT?

Daniel Tn198January 31, 2017 09:57PM



Sorry, only registered users may post in this forum.

Click here to login