Findmall.com
 
 






Fisher CZ Forum


Welcome! Log In Register
Coil Question
Posted by: Happy_Hour
Date: December 21, 2015 04:52PM
Coil from the 6 also work with the 6a

Re: Coil Question
Posted by: Dave J.
Date: December 21, 2015 05:53PM
electrically similar, different connectors.

Re: Coil Question
Posted by: trojdor
Date: December 21, 2015 05:59PM
If that is a question, the answer is no...different connector.

In fact, the only real difference between the 6 and 6a is the coil connector.

(Note, however, that many CZ-6 machines were converted to CZ-6a specs (original and current) connector and and aren't marked...you just have to look at the box.)

Other than the water machines, all CZ/Quicksilver coils will work with all CZ detectors...EXCEPT for the CZ-6.
(They tried out a more weatherproof connector that just didn't pan out on the 6.)

Hope this helps,
mike

Re: Coil Question
Posted by: 88junior
Date: December 22, 2015 05:14AM
The CZ6 also had a pigtail that you plugged your headphones into instead of the standard 1/4" jack.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
So, can I use a 10.5" Quicksilver coil on my CZ20?
Posted by: houndawgg
Date: April 10, 2016 05:17PM
Quote
Dave J.
electrically similar, different connectors.

It has 5 pins, although only four are used on the prongs.







Re: Coil Question
Posted by: R Mendes
Date: July 18, 2016 06:40PM
I have a CZ6a.
Which is the best coil for beach hunting (wet sand)???
Thanks

Sorry, only registered users may post in this forum.

Click here to login