Findmall.com
 
 






Fisher CZ Forum


Welcome! Log In Register
Fellow CZ'ers need your help. .........
Posted by: Ivan
Date: November 13, 2016 01:05PM
Does anyone remember a gold ring breakdown....showing a CZ meter....and how a large number of gold rings...show up on it. It was really neat had them by percentage on where they would be on the meter.where can I find this info...anyone remember it? Please show me the way.......thanks.

Re: Fellow CZ'ers need your help. .........
Posted by: RichW
Date: November 13, 2016 02:47PM
Funny you should ask. I was searching for the same thing and google pulled it up the other day. Maybe I can find it again. Foil has the highest percentage, followed by square tabs then round tabs . Nickel and zinc have pretty low percentages. I just can't remember the exact percentages.

Re: Fellow CZ'ers need your help. .........
Posted by: RichW
Date: November 13, 2016 02:51PM
Oct. 31, 2015 on this forum. Hope it helps

Re: Fellow CZ'ers need your help. .........
Posted by: Ivan
Date: November 13, 2016 05:13PM
Do you remember the author or message title? Thanx

Re: Fellow CZ'ers need your help. .........
Posted by: tvr
Date: November 13, 2016 05:20PM
Re: Fellow CZ'ers need your help. .........
Posted by: Ivan
Date: November 13, 2016 07:15PM
Thank You tvr.........that's what I've been looking for.!!

Re: Fellow CZ'ers need your help. .........
Posted by: Dan-Pa.
Date: November 13, 2016 07:17PM
TVR got it......get a foil to nickle bounce and dig for sure.....

Re: Fellow CZ'ers need your help. .........
Posted by: marcomo
Date: November 14, 2016 11:25PM
Quote
Dan-Pa.
TVR got it......get a foil to nickle bounce and dig for sure.....

Foil to nickel bounce :thumbup:

Re: Fellow CZ'ers need your help. .........
Posted by: Mike Hillis
Date: November 15, 2016 12:42PM
CZ-70 Pro manual has a ring breakdown in it.

HH
Mike



*****Fisher F75 LTD w/DST ***** Whites V3 ***** Teknetics G2+LTD ***** Tesoro NT Golden/Cleansweep combo *****Teknetics ETPro *****

*****Teknetics Omega 8500*****Tesoro Golden Sabre II with VDI & Histograph *****Tesoro Compadre *****

Re: Fellow CZ'ers need your help. .........
Posted by: Ivan
Date: November 15, 2016 06:04PM
Foil to nickle bounce.........info in CZ 70 manual.........boy when you ask for help here...you really get it. I thank all of you for your replies. Just curious about this bounce? Someone else also mentioned a quick fast short sweep over foil to see if it's really foil or small gold.It was on aother site didn't get all the details....anyone know about this trick?

avatar
Re: Fellow CZ'ers need your help. .........
Posted by: Paulie
Date: February 26, 2017 10:51AM
Quote
Dan-Pa.
TVR got it......get a foil to nickle bounce and dig for sure.....

Could someone explain this? Thanks!



Twitter: @RelicDetective

:minelab: CTX3030

:minelab: E-Trac

:fisher: CZ-21

:fisher: CZ-6

:garrett: Pro Pointer

:garrett: Pro Pointer AT

Predator Tools Model 35 - Piranha Shovel & Model 85 Digger

Began metal detecting in 1984.

Very first Metal Detector: :whites: Coinmaster 6000/DI Series 3

Re: Fellow CZ'ers need your help. .........
Posted by: tvr
Date: February 26, 2017 01:06PM
Foil to nickle bounce ... if you are getting a low tone that bounces to mid-tone which is foil or a high tone nickle ID, dig. Some low tone to high tone bounces are iron signals. If you slow the sweep way down, they normally stay low tone iron signals. If they are big iron targets, going to auto-tune (all metal) or use the pinpoint, you can size the target. If it is big and gives a low or a low to high tone bounce, I frequently walk away from it. I will dig virtually every target that gives a low tone to mid-tone bounce. Have recovered several small gold rings and small gold pendants by digging those signals.

Here is one from a while ago: http://www.findmall.com/read.php?23,1675537,1675537#msg-1675537

edited to add: If it is a deep low tone target that pinpoints as a small target, it can pay to dig. I have not found a ring that way yet, but there is a post somewhere on the forum where testing showed a deep ring that a CZ found, registered as low tone. Other detectors that were being used to compare signals were not seeing the ring until the ring was pulled up not quiet so deep.



Edited 1 time(s). Last edit at 02/26/2017 01:11PM by tvr.

Re: Fellow CZ'ers need your help. .........
Posted by: Blissterd1
Date: October 03, 2017 02:31AM
I believe this is what you are talking about...




Sorry, only registered users may post in this forum.

Click here to login