Findmall.com
 
 






Fisher CZ Forum


Welcome! Log In Register
Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 14, 2017 12:28AM
What was your guys results after getting Tom to calibrate your CZ's? He currently has my CZ6A and I'm kind of anxious to get it back to see how it performs. My CZ6A air tests a dime at 10 3/4" but the ID of targets was off and the audio was smearing on targets. So tell me what your experiences was. Thanks Morgan



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

Re: Tom Dankowski Tuned CZ's ?
Posted by: Dan-Pa.
Date: January 14, 2017 09:45AM
He tunes them up well so should be fine when it returns...as far as depth not all of them can be tuned to max so depth will vary....

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 14, 2017 11:48AM
Well I just got an email from Tom and he said that it was a little out of calibration and that it is now getting 11.8" in his Florida dirt. So I think I am going to have a very good machine once I get it home.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: Lake Hunter
Date: January 15, 2017 12:17AM
I'm sending my CZ3D to him and will let you know the results.



Nothing like seeing GOLD in the scoop !!!

Re: Tom Dankowski Tuned CZ's ?
Posted by: marcomo
Date: January 16, 2017 01:51AM
Quote
88junior
Well I just got an email from Tom and he said that it was a little out of calibration and that it is now getting 11.8" in his Florida dirt. So I think I am going to have a very good machine once I get it home.


You are indeed! $100 well invested...

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 16, 2017 07:58PM
Quote
Lake Hunter
I'm sending my CZ3D to him and will let you know the results.

Lake Hunter is yours one of the FTP CZ3D's or one of the 1021 CZ's? What was yours air testing?



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 16, 2017 08:01PM
Quote
marcomo
Quote
88junior
Well I just got an email from Tom and he said that it was a little out of calibration and that it is now getting 11.8" in his Florida dirt. So I think I am going to have a very good machine once I get it home.


You are indeed! $100 well invested...

Yeah I figured for a hundred bucks it would be money well spent. The main reason I sent it in was zinc pennies in normal mode was registring as high coins. And Tom corrected that issue according to his email he sent me.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: Lake Hunter
Date: January 16, 2017 09:44PM
Quote
88junior
Quote
Lake Hunter
I'm sending my CZ3D to him and will let you know the results.

Lake Hunter is yours one of the FTP CZ3D's or one of the 1021 CZ's? What was yours air testing?

My CZ3D is a newer one. And it's air testing a dime at 9.5" with 8" coil.



Nothing like seeing GOLD in the scoop !!!



Edited 1 time(s). Last edit at 01/16/2017 09:45PM by Lake Hunter.

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 16, 2017 10:11PM
Tom does what he can to get you as much depth as he can but the one thing that matters the most is proper target ID at depth. I've had several CZ's over the years a few of them didn't air test that well but in the ground they would go deeper which amazed me.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: Lake Hunter
Date: January 16, 2017 10:17PM
Quote
88junior
Tom does what he can to get you as much depth as he can but the one thing that matters the most is proper target ID at depth. I've had several CZ's over the years a few of them didn't air test that well but in the ground they would go deeper which amazed me.

Hopefully Tom can get some extra depth on mine. At 9.5" it reads properly but anything deeper..it doesn't.



Nothing like seeing GOLD in the scoop !!!

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 17, 2017 12:52AM
He may be able to squeeze out a half to one inch. Let us know what he has to say about your unit.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: cometguy
Date: January 17, 2017 08:28AM
I was so happy with my Dankowski results. He has tuned two 1021s for me. It is such a joy to know they are doing what they are supposed to do. My first coin after my tune up was an 1834 bust dime. Still my oldest silver and screamed at me. Great to see a 12 inch Dankowski sticker on it, boosts your confidence. I will always send a new to me CZ in to Tom. Happy hunting, the CZ is a great, go to, coin hunter.

Don
HH

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: HighPlainsHunter
Date: January 17, 2017 10:12AM
Quote
cometguy
I was so happy with my Dankowski results. He has tuned two 1021s for me. It is such a joy to know they are doing what they are supposed to do. My first coin after my tune up was an 1834 bust dime. Still my oldest silver and screamed at me. Great to see a 12 inch Dankowski sticker on it, boosts your confidence. I will always send a new to me CZ in to Tom. Happy hunting, the CZ is a great, go to, coin hunter.

Don
HH

What was the turn-around time?

Re: Tom Dankowski Tuned CZ's ?
Posted by: 88junior
Date: January 17, 2017 04:09PM
He received mine on a Thursday and shipped it back out to me Saturday.



Garrett AT-PRO NEL Tornado 12x13 coil & 5x8" DD coil
Fisher1265x 8" coil
Tesoro Bandido II 8" coil
Deteknix X-Pointer
Raptor 31c digger and Whites Digmaster digger
Relic and Coin hunter over 25 years!!

avatar
Re: Tom Dankowski Tuned CZ's ?
Posted by: HighPlainsHunter
Date: January 17, 2017 05:59PM
Quote
88junior
He received mine on a Thursday and shipped it back out to me Saturday.

Can't ask for more than that. Thanks for the reply...

Sorry, only registered users may post in this forum.

Click here to login