Findmall.com
 
 






Fisher CZ Forum


Welcome! Log In Register
CZ3D Gold Question
Posted by: Fisher-Man59
Date: April 12, 2017 08:20AM
Hi, just wondering what meter readings are other CZ3D users getting on gold rings ,and other small gold items? I have only ever found 1 gold ring, "a very large class ring" and it metered in the zinc-salt area on the meter. Wondering if I am passing over a few, since I usually only dig high tones. Thanks

Re: CZ3D Gold Question
Posted by: Dan-Pa.
Date: April 12, 2017 11:42AM
Foil or foil to nickle bounces are the hot spot for small gold rings....

Re: CZ3D Gold Question
Posted by: marcomo
Date: April 13, 2017 12:40AM
Yes, the odds say you have almost surely passed up gold rings digging only high tones. But...
.
From the numbers I've seen, between `the zinc, foil and nickel ranges, you get about half the gold rings. If you are only digging high tones in the 3d enhanced mode, you'll be getting a good chunk of that half but not all since the lower end of foil and the upper end of the nickel range don't hit in high tone in enhanced mode.

Only you can decide what your level of patience is. And what the probability of gold is where you are detecting. A typical front yard is going to have a lot lower gold probability than a tot lot which is going to have a lot lower gold probability than a beach.

avatar
Didn't NASA Ton make a chart
Posted by: vlad
Date: April 14, 2017 01:13AM
on gold rings and the notch system on CZ's?

Re: Didn't NASA Ton make a chart
Posted by: Dan-Pa.
Date: April 14, 2017 10:03AM
No but I believe Fisher did but it was for the conventional CZ not the 3D model...I believe foil area covered over a third of gold rings...

Re: CZ3D Gold Question
Posted by: Zinc Penny
Date: May 03, 2017 04:46PM
I dug 100 foil signals one day 10 were gold. Always in the foil range. I don't own a cz anymore but it's a amazing detector. Nothing touches it on nickels. Or copper pennies as it's easy to not dig the stupid crusty zinc's.

avatar
Re: CZ3D Gold Question
Posted by: Harold,ILL.
Date: May 03, 2017 05:07PM
I only dig a couple gold rings and they were both in Foil range. Never dug a Ring in Nickel Range.



Etrac
CZ-3D
Golden uMax

Re: CZ3D Gold Question
Posted by: Agseeker
Date: September 29, 2017 11:34PM
The only gold ring I've found with the CZ-3D was in the nickel range.

avatar
Ring Chart
Posted by: therover
Date: September 30, 2017 06:24AM
Here ya go




Re: Ring Chart
Posted by: tmox
Date: September 30, 2017 11:54AM
Thanks!
That is a great little graphic!

Tim

Sorry, only registered users may post in this forum.

Click here to login