Findmall.com
 
 






Whites DFX Users Classroom Forum


Welcome! Log In Register
avatar
How to use Block Edit
Posted by: Larry (IL)
Date: February 07, 2008 01:56PM
Re: block edit
Posted by: OkieDigger
Date: April 28, 2007 11:30AM
Registered: 1 year ago
Posts: 24

It took me a minute to figure it out, but once you know how it's a piece of cake. Here's how I do it. Go into block edit and run the VDI numbers all the way down to -95. Switch from "reject" to "accept" and back to "reject" (I do this just to be sure). Now, with the setting on "reject" go up the VDI scale to the desired "accept" range. For instance let's say you only want to dig copper pennies, dimes and large silver. So you go up the scale to from -95 to +80 in "reject" mode. Once you're at +80 you switch to "accept" (by hitting the "enter" button) and then run up the VDI scale to +95 in "accept" mode. When you get to +95 you hit the "Menu" button and you're set



Re: block edit
Posted by: Larry (IL)
Date: April 29, 2007 03:01PM Moderator
Registered: 2 years ago
Posts: 1,355

That is exactly how to do it from Okiedigger. The program I use is Reject -95 to +9, Accept +10 to +94 and reject +95. I use this 90% of the time unless I am trying to get to the really deep stuff. I gain a little more depth with this, Reject -95 to -40, accept -41 to +94 and reject +95.



Re: block edit
Posted by: jack in omaha
Date: May 16, 2007 09:55AM
Registered: 1 year ago
Posts: 92

OK, but how do you double check it. I am not sure I have it set correctly


Re: block edit
Posted by: Larry (IL)
Date: May 16, 2007 10:22AM Moderator
Registered: 2 years ago
Posts: 1,355

To check what you have done in Block Edit, go to Disc. Edit and you can run through the whole Discrimination pattern without changing anything. To change something, press ENTER to accept or reject whatever needs to be changed. Don't forget to save changes to your Custom program or your changes will only be temporary.

Sorry, you can't reply to this topic. It has been closed.