Findmall.com
 
 






Minelab Safari/Quattro Forum


Welcome! Log In Register
Safari coils
Posted by: wentong8800
Date: January 20, 2017 06:40AM
I want to detect deeper coils,15 inches,But little understanding,Please give suggestions,thanks

1.NEL Thunder 14.5x10.5" Search Coil
2.Coiltek 15" (WOT) All Terrain Search Coil
3.CORS Fire 15” DD Search Coil
4.NEL Attack 15" Search Coil

Combined with my needs, please give me a recommendation, thank you.

avatar
Re: Safari coils
Posted by: DnD
Date: January 20, 2017 10:26AM
Ground conditions as well as the targets mass and shape play a significant factor in depth. In test targets, I've used a WOT to read a dime at 16", a quarter at 22", and aluminum cans at 30". The down side is the WOT reads deeper at the center of the coil than at the edges.

On the NEL Attack, I had nearly equal depth across the coil's footprint, but it was 1.5-2" less than the WOT's max depth.

I suppose results may vary, but was my experience.



...CTX, DP-Pulse, and over the years, 22 other detectors...

Re: Safari coils
Posted by: wentong8800
Date: January 21, 2017 02:41AM
Quote
DnD
Ground conditions as well as the targets mass and shape play a significant factor in depth. In test targets, I've used a WOT to read a dime at 16", a quarter at 22", and aluminum cans at 30". The down side is the WOT reads deeper at the center of the coil than at the edges.

On the NEL Attack, I had nearly equal depth across the coil's footprint, but it was 1.5-2" less than the WOT's max depth.

I suppose results may vary, but was my experience.

Thanks,Good day.


Sorry, only registered users may post in this forum.

Click here to login