Garrett Users Forum

This thing has really been solid for me.....works good if takin care of. Anyone else out there use one of these ? For 15 bucks can't beat it. Thx

---

Andrew

Metal Detector Hobbyist
Ace Garrett 350 with the sniper coil and 8x12 DD coil
Midwest

A buddy of mine has one for a backup.

John

Ive used mine for the last 7 years with-out a problem.Works great and you cannot beat the price.HH Wayne in Delaware

i loved mine but saved up and got the pro pointer that is a sweet pinpointer hit bart up he can give you a good deal one one http://bigboyshobbies.net/

---

AL greenwoodhunter1- Findmall.com sponsor i use http://bigboyshobbies.net/ and http://www.backwoodsmetaldetectors.com/
4. Silvre rings
2. Gold. rings
11 wheat pennies
1 buffalo nickel
1 1903 v nickel
3 silver quarters
1 1963 franklin half
2 walking liberty half dollar 1941-&-1942
1-1882 Morgan Dollar
1- 1919 merk dime
1- indiana state numismatic association 50th annual conventon coin
2013- garrett at pro
2012 - fisher gold bug pro
2010 - garrett ace 250
2011 - garrett pro pin pointe
First - whites coin master 2000d been detecting from 1980 to now 2013
saving parks and tot lots one dig at a time
Greenwood Indian
METAL DETECTING BOOT CAMP A GOOD BOOK WITH GOOD TIPS

I had one but gave it away when I bought my propointer. My problem with it was that the probe has to be actually touching metal before it goes off. If your target is even slightly covered, it does nothing. Glad it works for you though.

MrGee

Never had one, but from what I have heard, they are not that bad, but do need to be handled with kid gloves...I carry around a Teknetics (Bounty Hunter) Pin Pointer as a backup...It was also relatively cheap, but works in a pinch.
I modified the BH with a stronger buzzer and a LED light. I also tweked a pot to get maximum sensitivity and depth. It will do about 1 1/2 inches on a dime.




HH,

---

Deactivated at users request 08/26/12

You got to know how to use them. Read the manual.

I guess my point here is yes there r better pinpointers out there than this one but for 15 bucks u can't beat this one if u take care of it. For people lookin for u and funds r low....this is a good choice.

I also have one it works great it sounds off at 1.5 inch.

I have one as a backup although I used it as my main 'pointer for about a year. I really never had any complaints with it other than it being a little fragile feeling. I had to resolder the power switch and sealed the tip with silicone but it was plenty good for it's intended use! I upgraded to a Propointer because I COULD and I do like it better. But I won't feel undergunned if I have to bring out the $15 dollar backup!

---

Of all tyrannies a tyranny sincerely exercised for the good of its victims may be the most oppressive.
C. S. Lewis

I have one that I put a switch on and a vibrating motor. It works really good.

---

Christian Ky Boy
Minelab x-terra 70

Is this a dedicated pinpointer from Harbor Freight, or a modified stud finder. Just curious... there is a Harbor Freight not too far from hear so I may check it out; just wondering what I should ask for if I don't see it. Any body got a pic or model number?

John

---

It is by caffeine alone I set my mind in motion. It is by the juice of canephora and arabica that thoughts acquire speed, the hands acquire shaking, the shaking becomes a warning. It is by caffeine alone I set my mind in motion.

Garrett AT Pro
Garrett Infinium
Garrett ProPointer
Tesoro Stingray II
a really long handled shovel...

I think this is the one:
http://www.harborfreight.com/metal-detector-97245.html

John

The Cen-Tech pin-pointer sold by Harbor Freight, was designed to find nails in lumber that was being reused. Someone saw the potential for them to be used as pin-pointers, now more are sold to find coins in holes, than are sold to find nails in wood.

They are cheap, with poor ergonomics but some of the other machines out there are just as ugly. The Cen-Tech can be tuned and tweaked and for the money it is a very good machine. I have seen people write that they don't hold up to the 'rough stuff' but, I have seen the same people write on the forums that their expensive Garret pin-pointer broke or that they have broken a couple of Garrets and they always imply that the fault lays with Garrett! Look after your tools and they will look after you.

The Cen-Tech is a good, low priced machine, look after it and it will ferret out the coins you can't find, but your metal detector tells you are there.

BTW this is the most interesting Hack (modification) I have seen for a Cen-Tech.

http://metaldetectingforum.com/showthread.php?t=104834

If these little boxes of technology were not great for the price, people would not take the trouble to work on them.

Thylacine

The Harbor Frieght Pin Pointer was my first. It's really a stud finder but it works ok for finding
a target. Once I could afford the Garrett Pro Pointer, I never looked back!