Findmall.com
 
 






Technology Forum


Welcome! Log In Register
Beachscan 2
Posted by: alfred
Date: March 26, 2011 10:55AM
Hi,
I have just bought a Beachscan 2 detector because I fancy having a go on the beaches for the first time. I have read the manual and it does not seem to say anything about what the Sat speed control. I would be most appreciative if somebody on the forum can put me on the straight and narrow onto how to use this machine as I really want to get out and use it but don't know how to set it up for the best performance. A friend of mine told me these are great detectors and will find me lots of goodies on the beach......I hope he is right. Many thanks.

Re: Beachscan 2
Posted by: Bob (West of Tampa)
Date: March 26, 2011 06:30PM
I asked the same question on here about 7 months ago, here is the respone to my question.
************************************************************************************************************
Eric Foster Beach Scanner
Posted by: Bob (West of Tampa) [ Send a Message ]
Date: August 22, 2010 02:27PM Registered: 5 years ago
Posts: 11

I have a Beach Scanner with 8 and 11 inch coils. Haven't really used it much. Are the coils water proof? Any suggestions on settings using this detector on Florida beaches?

Thanks, Bob


Reply Quote ReportRe: Eric Foster Beach Scanner
Posted by: UK Brian [ Send a Message ]
Date: August 23, 2010 03:02AM Registered: 5 years ago
Posts: 883

Its a Beachscan PI. This was the first P.I. I ever used on the Florida beaches and I used the 11" loop all the time for the extra depth.

The control box is weatherproof and the coils fully waterproof so you don't have any worries.

Threshold/audio control is supposed to be set about mid way. You can run the detector in the silent range but this does reduce detection depth. If near a busy road or the waves/wind are noisy set high enough so you can still hear the deeper targets.

The reject control adjusts the pulse frequency and alters the characteristics of the machine in that at the minimum (MIN) position the detector is optimised for the best sensitivity to small/thin items. MAX setting improves performance on larger items but will reject some small/thin wanted items which will not now give an audio response. Though your in Florida I've lots of Spanish hammered coins from your beaches so its not clear cut as to which setting might be best. Large gold ring or more interesting hammered ? It depends what your more interested in.
Set halfway between the two extremes you have a more balanced response which is better for general searching.

This control is also the way to minimise any interference near towns or nearby detector users as it changes the frequency.

Though an older pulse machine (mid 90's) its performance and light weight mean it still delivers the goods. Best of luck.


Reply Quote ReportPlus discrimination...
Posted by: UK Brian [ Send a Message ]
Date: August 25, 2010 02:24AM Registered: 5 years ago
Posts: 883

One other plus is you can discriminate out iron and still pick up most of the gold rings.

avatar
Re: Beachscan 2
Posted by: LE.JAG
Date: March 27, 2011 06:03AM
Hi

I had Beachscan, two potentiometers
Very good machine
Reject at least,
audible just audio threshold
Good hunting



Fischer--Aquamanta // Pulsepowers Goldscan 5C // Nexus coronado // Vista Gold

( sorry for my english )




Re: Beachscan 2
Posted by: alfred
Date: March 27, 2011 09:07AM
Thank you for the replys you have been most helpful,i am going to the beach now to give it a go :smile:

Re: Beachscan 2
Posted by: quibe56
Date: March 27, 2011 09:16AM
Bonjour,
ou peut-on se procurer un beachscan 2 et ou peut-on le faire r

Re: Beachscan 2
Posted by: Ollie b gold
Date: July 31, 2017 05:19PM
Hello I know this is a old thread but I have the same beach scan detector but it seems to not be working properly when I switch it on it dings then fades to a quite ding but then I try adjusting the volume or threshold and nothing happens would anyone have any ideas on what the problem is please thankyou ollie

Sorry, only registered users may post in this forum.

Click here to login