Findmall.com
 
 






Nautilus Detector Users Forum


Welcome! Log In Register
2ba beeps when when the control box or coil plug is lightly bumped
Posted by: oneton
Date: January 10, 2015 08:02PM
If I finger thump the control box or the coil wire or coil plug to control box the detector beeps is this normal or should I set or check something. This is after I ground balance the unit and get her ready to hunt

Re: 2ba beeps when when the control box or coil plug is lightly bumped
Posted by: garys relics
Date: January 12, 2015 11:35AM
Sounds like the coil wire might not be making a good connection. I would start at the top and unplug the wire leading to the detector and try re wrapping the coil wire tight around your detector rod as so there is no kinks in the wire. Make sure all connections are tight, and then try it again. If it still does it, it might be the wire leading into the connector is coming loose, and that would give false signals, and I would give Wayne a call and see what he thinks. Maybe this will help, Gary.

Re: 2ba beeps when when the control box or coil plug is lightly bumped
Posted by: oneton
Date: January 12, 2015 02:30PM
Great, I will try this,thanks for the help

Re: 2ba beeps when when the control box or coil plug is lightly bumped
Posted by: oneton
Date: January 12, 2015 02:32PM
It seems to work good on air testing I am getting 14 inch on a dime,15 inch on a nic

Sorry, only registered users may post in this forum.

Click here to login