Findmall.com
 
 






Nautilus Detector Users Forum


Welcome! Log In Register
How to adjust coil by coin?
Posted by: shelton7522
Date: April 15, 2017 03:28PM
I was check my IIB coil and this coil is almost out of specification. R&C knobs starting point is not in 12 o'clock. I was switch this coil to IIBa... and this coil doesn't calibrate. Doesn't work with IIBa. If you push coil calibartion button, you will get only one low, grunt sound, not few like with healthy coil..

So, I was hear about coin trick, to attach coin to broken coil (center) and than calibrate. I was check this method... and coil pass calibration process... and coil works good enough.

Any other tips? What coin? Silver, copper or doesn't matter?

Re: How to adjust coil by coin?
Posted by: bigchuckinva
Date: April 15, 2017 04:21PM
It best to send your coil to Wayne Lee and have coil open and balanced.

Re: How to adjust coil by coin?
Posted by: shelton7522
Date: April 15, 2017 04:31PM
I know it but I looking also other solutions.

Re: How to adjust coil by coin?
Posted by: bigchuckinva
Date: April 15, 2017 09:25PM
Proper balanced coil on DMC2B most important part super depth of Nautilus . There no short cut to make coil proper balance unless open and set via scope. It best to have extra coil when one my need balancing. Wayne Lee also making new coil and his repair turn around is fast. Chuck

Re: How to adjust coil by coin?
Posted by: rockyj
Date: June 11, 2017 03:26PM
A coil can go out of balance from being in the trunk of a car on a hot day. Once the coils warp they can never be balanced. Perfect alignment of coils produces the incredible depth along with the circuitry in the coil.

Sorry, only registered users may post in this forum.

Click here to login