Findmall.com
 
 






Teknetics Forum


Welcome! Log In Register
T2 breaks into late 1800s
Posted by: cedarswamp
Date: February 28, 2017 07:05PM
Out for about an hour came across this iffy signal repeatable tonight exact deapth of my pinpointer 9 inches 1884 v nickle,,,,,CEDAR




Re: T2 breaks into late 1800s
Posted by: Gamma_Joe
Date: February 28, 2017 09:02PM
That's a beauty. When detecting here in Florida, mostly in public parks, usually I'm filtering out nickel signals because there's so many pulltabs.

It's a tough call to make. I try to cover more ground for silver, instead of taking the time digging for nickels and getting pulltabs.

Now looking at that beauty you found, I'm thinking maybe I should start filtering for nickels again.

Well done!

Re: T2 breaks into late 1800s
Posted by: cedarswamp
Date: February 28, 2017 09:44PM
I did the good repeatables that are in the tab range if i.d. dont bounce around if there deep I get excited when it hits high tones, thats why I like to run tone 3 in parks 2+ in iron.Yesterday I dug a pultab only to find a wheat penny in the same hole about 8 inches,,,,,CEDAR

Re: T2 breaks into late 1800s
Posted by: chuck, ky
Date: March 01, 2017 04:28PM
Why 2+ in iron instead of 3? In 3 doesn't nickles read medium.

Re: T2 breaks into late 1800s
Posted by: cedarswamp
Date: March 01, 2017 11:16PM
In tone 3 nickels produce high tone

Re: T2 breaks into late 1800s
Posted by: Neil
Date: March 02, 2017 09:21AM
Beautiful coin.
what is your disc setting, that's deep and was repeatable.



in everything give thanks
Etrac
X5




SunrayGold and Detectorpro Black Widow headphones

Re: T2 breaks into late 1800s
Posted by: cedarswamp
Date: March 03, 2017 11:27AM
I run o disc. if I can 3 tones unless it gets to busy than i go 2+,,,,,CEDAR

Re: T2 breaks into late 1800s
Posted by: chuck, ky
Date: March 03, 2017 06:06PM
I have only used 1, 3, and BP. 3 is low for iron, medium for aluminum, high for coins, what does 2+ give you and whats the advantage. Thanks

Re: T2 breaks into late 1800s
Posted by: cedarswamp
Date: March 03, 2017 09:46PM
Tone 2+ allows iron to grunt easy to here the distinction between ferrous non ferrous targets the advantage would be in sights infested with iron aim to dig all non ferrous targets.Tone 3 produses a high tone on most coins including nickels medium tone for most trash however bullets also produce a medium tone that would be my reason to switch to 2+,,,,,CEDAR

Sorry, only registered users may post in this forum.

Click here to login