Findmall.com
 
 






NEW Garrett ATX Metal Detector


Welcome! Log In Register
My :detecting:ATX modified
Posted by: tifred
Date: December 11, 2015 12:51PM
Hello

My name is Fred and I am in France

I buy a iATX garrett in poor condition, and I modified.

Coil is garrett infinium DD 5X10




Re: My :detecting:ATX modified
Posted by: dmnz
Date: December 11, 2015 01:09PM
Wow looks pretty good! How is the control handle mounted??

avatar
Re: My :detecting:ATX modified
Posted by: John-Edmonton
Date: December 13, 2015 10:39AM
Interesting.....some more information as to what and why you did would be useful. :thumbup:

Re: My :detecting:ATX modified
Posted by: tifred
Date: December 13, 2015 01:00PM
hi,
it is difficult to speak English to me, but I will try with google traductor.
Here is the photo of the ATX I buy it.
I buy ATX in poor condition is a small price.
I install the pcb in a plastic case.
I put a layer of graphite inside the casing (33 graphit)
I set the box on a white cane's xlt. an external battery.
8x 1.5 volts.
the coil is garrett 5X10 infinium
the original coil is out of order
The original control handle has been cut by the previous owner,
I fitted into the wrist cane XLT.
EXCUSE ME FOR MY BAD ENGLISH ...
Thank




avatar
Re: My :detecting:ATX modified
Posted by: Old California
Date: December 13, 2015 01:20PM
Looks good! Very nice, well balanced too.

I like it!
Paul



AKA..Paul (Ca)

Whites GoldMaster BFO
Compass Klodike BFO
Bountyhunter BFO
FisherScope TR
Metrotech TR
Detectron TR
Rayscope TR
Mity Mite TR
Garrett BFO
D-Tex BFO
Goldak TR
Relco BFO
Jecto BFO
Teknetics
Roach TR

avatar
Re: My :detecting:ATX modified
Posted by: John-Edmonton
Date: December 13, 2015 02:52PM
Thank you....your English if fine. Thanks....that pretty well clears it up for me. Great job my friend.!




avatar
Re: My :detecting:ATX modified
Posted by: steve herschbach
Date: December 16, 2015 09:55PM
Fantastic work! What does it weigh?



Minelab GPZ 7000, Gold Monster 1000, Equinox 800; Garrett ATX; Makro Gold Racer; White's V3i/Bigfoot; Garrett Carrot; Sun Ray Pro Gold

Re: My :detecting:ATX modified
Posted by: stalker1
Date: December 17, 2015 02:42AM
the sea hunter mk2 8" mono coil works on the atx . i tried it a month ago . but as i didn't have a atx 8" mono to test it against too see what or if there was any difference . i cant say . all i can say it works ,,,

nice mod on the atx : tifred

Re: My :detecting:ATX modified
Posted by: tifred
Date: December 17, 2015 11:35AM
thank you for your comments :thumbup:

very good info for the coil sea hunter, but his works really well for ATX?

its weight and 3.7 ib, really lightweight.

I'll try to make the original coil ,But I need advice for winding ...

Here are the photos of the damaged coil I repaired

I use a piece of the case to repair the coil.

I use a soldering iron to weld the piece,

Here is the satisfactory result:smile:




Re: My :detecting:ATX modified
Posted by: Dancer
Date: December 18, 2015 10:07AM
Tifred, Maybe you should contact Garrett about engineering job. At least maybe a service representative in your Country.
Good luck and a good job.

Dancer

Re: My :detecting:ATX modified
Posted by: dmnz
Date: December 21, 2015 03:47PM
Hi there :). Wondering if you have the "wiring diagram" for the ATX coil? I have figured it out for a DD coil on the Infinium if this is helpful? Would be good to know.... Internal resistors added to wiring? Number of turns I each part of the coil etc?

How did you remove the wire / epoxy??

Re: My :detecting:ATX modified
Posted by: Booty Hunter
Date: December 27, 2015 11:27PM
Great job on the modifications!

Just a heads up ............the seahunter mark2 coil has a much different conductance than the ATX coils. I tried my mark2 10x14 coil on my ATX today and it picked up a nickle at about 1" compared to about 12 inches using my infinium 10x14dd coil. I checked the conductance and it is way different.

Last year I built a 4 foot DD for my ATX. Crazy huge, but it failed before I was able to finish sealing it up. I then set out making a 2' DD and it failed during the same final step. It is fixable, but it has been on the bench for the last year while I pursue other projects. I will get back to it next summer. In the meantime, I need to buy another 10x14 infinium dd. I just finished another carbon straight shaft. Pared with the infinium coil, it beats swinging the original coil big time.

A few days ago I did find my first 18K. It was a tiny and simple rose gold band but it was a Tiffanys and is listed at $800. Ebay has them for $300. It's not much gold, but it was my first 18K and I'm stoked about that.

Re: My :detecting:ATX modified
Posted by: dmnz
Date: December 28, 2015 02:54AM
Hi guys

Re: sea hunter mk II coils:

It does appear the inductance is different - however the SH 8 inch mono seems to work with the ATX. Also - the larger SH mono coil also seems to work (ensure you factory reset the detector, otherwise it won't work properly...!!!!!

Booty Hunter - did you do a factory reset??????

On mine I seem to get similar depth in air tests as with the SH 8 inch coil. But with much wider coverage?

All in all, the coils seem to work for me??

Note:

Resistance of coils seem to be similar, 1.7 ohm

Standard ATX 8 inch mono has a 200 ohm (or 216 ohm) resistance on two pins - I wonder if this is for the "iron check error" when using the 8 inch mono. So was scared to push the iron check button with the sea hunter coils in place! Maybe someone has bigger xxxx than me to try that!

All in all - it seems to work??

Dale



Edited 3 time(s). Last edit at 12/28/2015 02:59AM by dmnz.

Re: My :detecting:ATX modified
Posted by: 01001101TQ
Date: January 29, 2016 06:57PM
hey guys..
would you please take some high definition picture from atx board and components .?
i want to build it by revers engineering...
therefore i need the IC and the other components number...
please help me :)

Re: My :detecting:ATX modified
Posted by: beav
Date: February 02, 2016 10:19AM
Hey dmnz,
Does the SeaHunter MKII 8" mono coil you tried on your ATX have comparable performance/depth as the "standard-issue" ATX 8" mono coil that is meant for the unit?

Thanks
Beav

Sorry, only registered users may post in this forum.

Click here to login