Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Finally able to get out and detect

this statement here by me is not correct
when I put the LG28 on my Legend that was originally 1.04 it is a whole different detector and seems to run really good
it should have read
when I put the LG28 on my Legend that was originally 1.05 it is a whole different detector and seems to run really good

when I switch the LG 24 to my legend that came with the 1.04 version it runs terrible with the LG24, but with the LG28 on either detector they both run the same and run very good,again this is making no since at all

has anyone else ever experienced two identical detectors with identical programs running one coil differently from each other, this is a first for me
 
DigDog said:
Thats why i was asking i read it as you and others with v1.04 legends could have motherboard issues
Click to expand...
Andy never said the 1.04 version Legends had mother board issues he did state that he has seen or had other Legend users seeing similar issues and he also never said the issues were specific to just 1.04 Legends again you are adding more to what I stated then I actually stated.
 
oldkoot said:
I was finally able to go out and do some detecting yesterday and give the 1.11 a try and also the LG24 coil, I will say this new version is vary stable and seems a bit deeper than the previous versions, there is one thing that is confusing me though, I have two Legends and both are updated to the 1.11 version what is confusing me is one of the two Legends I have are performing completely different from the other one, my first Legend I picked up was one of the first to come into the U.S so it came with 1.04, my second Legend that I purchased to try to teach my wife how to detect was 1.05 version and I had the dealer I purchased from to update to 1.07, I have performed the updates myself my original Legend that came with 1.04 is running way less stable and is not seeing targets near as deep as my Legend that was originally 1.05, something just seems way off with my Legend that originally came wit 1.04, the pin pointing is way off also on the one that was originally 1.04 also I detected for about three hours with both detectors swapping the LG24 coil from one to the other, and the Legend that ooriginally was 1.05 was just running much better than the one that came with 1.04, My Legend that was originally 1.04 is the one I used to do all the beta test versions with and in 1.10 Version 2 it was running fantastic but this is not the case any longer, this one is a head scratch-er to say the least

I really like the way the 1.11 and the LG24 is performing on my Legend that was originally 1.05, but you would think both would be performing the same but sadly they are not any where close to the same performance

I have performed yet another re install of the 1.11 and also performed yet another factory default reset on my Legend that came originally with the 1.04 version, and will give it another run the same way as I did yesterday, and hopefully something will change, but I am starting to wonder how many more re installs and factory resets of updates before my Legend with the 1.04 becomes a brick and becomes un useable all together, my Legend that came with 1.04 originally has frozen on me Multiple times since I installed 1.09 and also after I installed 1.10 beta test version 3, I never had an issue with My original 1.04 legend freezing until the 1.09 update was released to us, my Legend that was originally 1.05 has never froze on me and I have never had an issue with the update process with the one that was originally 1.05 either, so this new issue I am wondering if there is not an issue with it all together.

Needless to say this is getting quite frustrating to say the Least for me, with my Legend that was originally 1.04.
Click to expand...
Im far from being a techno person but years ago I met an older gentlemen who knew alot about electronics. He told me way back when, the electrical components they used in metal detectors were inferior, He swapped out components and the machines ran much better. Maybe there's a difference between the older machine and newer machine as far as circuit board components.
Different transistors, etc... Just a a thought.

HH
Donna(NJ)
 
oldkoot said:
Andy never said the 1.04 version Legends had mother board issues he did state that he has seen or had other Legend users seeing similar issues and he also never said the issues were specific to just 1.04 Legends again you are adding more to what I stated then I actually stated.
Click to expand...
I get it u was just explaining how i read it wrong
 
oldkoot said:
Andy never said the 1.04 version Legends had mother board issues he did state that he has seen or had other Legend users seeing similar issues and he also never said the issues were specific to just 1.04 Legends again you are adding more to what I stated then I actually stated.
Click to expand...
“I”
 
You must log in or register to reply here.
Top