Findmall.com
 
 






Makro Detectors Forum


Welcome! Log In Register
avatar
R2 Relic Settings Advice
Posted by: Old Virginia
Date: November 14, 2017 09:49AM
I'm still learning the Racer 2 and, so far, have only used it on sites with heavy iron infestation with the NEL Snake coil. I've been quite pleased with its performance in the iron. But I hope to get out Thursday to one of my Civil War sites. Open fields, VERY little iron and VERY little modern trash. So I'm thinking I should run the R2 as hot as possible (Deep mode) with the stock coil. Any advice on settings in this environment?

Thanks!



http://oldvirginiablog.blogspot.com/



Edited 1 time(s). Last edit at 11/14/2017 09:49AM by Old Virginia.

avatar
Re: R2 Relic Settings Advice
Posted by: Kapok
Date: November 14, 2017 03:07PM
I've been hunting a site with conditions like that and was using Deep Mode with max sensitivity and the stock coil. My only problem was patience. Since there are so few signals, I tend to want to move faster, and Deep Mode needs you to run more slowly than 2 Tones or 3 Tones. I ended up going back to 2 Tones as I didn't feel the depth tradeoff was that significant. Of course, your mileage may vary, and I may be wrong (per usual)...

Let us know how it goes.



Makro Racer 2 with 11x7; 5x4;10x5.5
Makro Multi Kruzer with 11x7; 9.5x5
Equinox 600

avatar
Re: R2 Relic Settings Advice
Posted by: Tom Slick
Date: November 14, 2017 04:33PM
I agree with Kapok. I'd use D2, stock 11" coil, Gain as high as possible with disc 2, Iron Vol. 01, iSat 01, no notch, tone break 10 with tones st at 10kHz & 70 kHz. if you get into an area that is producing, switch to Deep mode and slow way down.



Arizona
42 years detecting, ex White's dealer.
Current Detectors:
Makro Multi Kruzer
Makro Racer 2
White's DFX x 3
Tesoro Tiger Shark
Minelab Sovereign GT

avatar
Re: R2 Relic Settings Advice
Posted by: Old Virginia
Date: November 14, 2017 06:27PM
Thanks fellas!

Sorry, only registered users may post in this forum.

Click here to login