Findmall.com
 
 






Metal Detecting Forum


Welcome! Log In Register
Loss Of Depth.
Posted by: Happy_Hour
Date: December 09, 2017 05:27PM
My Tesoro Compadre with the 4 inch, not the 5 inch coil, gets 2-3 inches more depth then my CZ 5 with the 4 inch..What would be the problem.



Edited 1 time(s). Last edit at 12/09/2017 05:30PM by Happy_Hour.

avatar
Re: Loss Of Depth.
Posted by: cometguy
Date: December 09, 2017 06:37PM
Lots more questions before anybody will take a shot at this. Is it a sudden problem? Have you tried different ground balance settings. Are you air testing or comparing in a test garden? Give us a more info and I am pretty sure people will have some suggestions or at least more questions.

Re: Loss Of Depth.
Posted by: Happy_Hour
Date: December 09, 2017 06:41PM
Quote
cometguy
Lots more questions before anybody will take a shot at this. Is it a sudden problem? Have you tried different ground balance settings. Are you air testing or comparing in a test garden? Give us a more info and I am pretty sure people will have some suggestions or at least more questions.

No on the sudden problem...Both at zero dis settings...Air and test garden...

Re: Loss Of Depth.
Posted by: tvr
Date: December 09, 2017 07:41PM
Do you have another coil to try on the CZ? I'd check ground balance, set the CZ up in autotune (all metal) and then see how deep in gets on the test garden targets.

avatar
Re: Loss Of Depth.
Posted by: Herb Jones
Date: December 30, 2017 03:01AM
compadre 4" and 5"?

Re: Loss Of Depth.
Posted by: umax
Date: December 30, 2017 07:38AM
I have installed a connector 5 pin to accept any 5 pin coil.

Sorry, only registered users may post in this forum.

Click here to login