Findmall.com
 
 






Minelab Explorer Forum


Welcome! Log In Register
Best settings for Explorer Se for a fields
Posted by: manseller@wp.pl
Date: March 20, 2019 05:36PM
Hi all. Hope you're well. Could anyone can help with setting the explorer se right for a fields with sef 15x18 inch coil. Many thanks

Re: Best settings for Explorer Se for a fields
Posted by: BigTony
Date: March 21, 2019 11:23AM
Manseller, I used the Exp II not the SE.
Mine was set to Ferrous sounds, most other advance settings were maxed out, except for threshold.
I kept my threshold set barely audible, I also moved slow, listening for the ping of silver.

IDXmonster will share his settings as soon as he sees your post, he used the SE. maybe send him a PM.

Also look above these threads and you will see stickiy notes, these are very helpful on display screen areas to watch for.

I am not home and don’t have my old notes with me otherwise I would list out my Exp II setttings.

Best of luck,

Tony

Re: Best settings for Explorer Se for a fields
Posted by: manseller@wp.pl
Date: March 21, 2019 04:40PM
Hi Tony. I still learning the machine with the smaller coil I can hear the signal easily. With the bigger is litte bit hard to get the signals right. I think I have to change the sensitivity on the bigger coil. Thank you for the tips. I will use them as soon as I get out to the field.

Re: Best settings for Explorer Se for a fields
Posted by: BigTony
Date: March 21, 2019 06:55PM
Your welcome.
Small coil is a killer in trash areas and has good depth.

Tony

Re: Best settings for Explorer Se for a fields
Posted by: manseller@wp.pl
Date: March 29, 2019 02:13AM
Finnaly I have setting up the explorer se right for the field with 10,5 inch coil. Machine works stability with out any issues. Have been digging in a very mineral ground but effectived. It's a proper beast of the fields. I have to setting up the machine for a beach with bigger coil.

Re: Best settings for Explorer Se for a fields
Posted by: IDXMonster
Date: April 11, 2019 06:41PM
Manseller...I run the Explorer2 which is a bit different than the SE but Big Tony said right....Ferrous sounds and wide open screen,NO discrimination. Investigate solid and repeatable signals for sure,especially when the cursor plants and stays. Not sure where you are or what you’re looking for but you said it already....a BEAST! Good luck with it...

Sorry, only registered users may post in this forum.

Click here to login