Minelab Excalibur & Sovereign Forum

Welcome! Log In Register
Coil Question
Posted by: surfman
Date: January 03, 2017 09:20AM
So I just got done with an Excal that I did quite a bit of work on. I took off the stock 10" coil and put on a 12x10sef. I had an extra Sovereign connector so I put that on it so I could possibly sell it. I did the same to an 8" a couple years ago. Hate to have something just laying around that I have no use for. My main question is the wiring at the connector. I followed the chart that I got form doing a search here. I did it like this, Red, Black, White, Yellow, 1,2,3,4. The chart ended up being wrong with respect to the wires for the new coil. I think it was the black and the grey wires were switched. I had to pull it back apart to correct that. I think Detech must have switched up the wires on the coils at some point. I did one about 5 years ago using the same chart and that one was right on. But to the 10" coil, do I have it wired correct? Does anybody here need one? If so send me a pm. Thanks in advance.

Been in the detecting hobby for around 17 years. Currently using; Minelab CTX3030 w/stock and 6" coils. For beach and water I have two Minelab Excaliburs. An Excal II, 10"on an Anderson Carbon Fiber over and under and a Blue 1000 with a 12x10sef on a green Anderson over and under. Both with remote PP and modified headphones.

Oldest Copper; 1694 King William&Mary

Oldest Silver; 1792 Half Reale

Gold Coin; 1852 $1.00 (Found with ATPro)

YouTube Channel; surfman1968


Coil Question

surfman569January 03, 2017 09:20AM

Re: Coil Question

surfman224January 04, 2017 02:39PM

Re: Coil QuestionN/T Jpeg Attachments

OldBeechnut271January 04, 2017 02:23PM

Re: Coil Question

Mel Parker238January 04, 2017 09:08AM

Re: Coil Question

surfman255January 04, 2017 10:45AM

Re: Coil Question

surfman274January 04, 2017 07:23AM

Re: Coil Question URL

Mel Parker259January 04, 2017 05:13AM

Sorry, only registered users may post in this forum.

Click here to login