Findmall.com
 
 






Minelab Excalibur & Sovereign Forum


Welcome! Log In Register
avatar
Re: Excal 1000 headphone problem on one side
Posted by: bootyhoundpa
Date: December 18, 2017 06:13PM
Sounds like a broken wire somewhere outside of the pod... i had a simular problem. I had a broken wire at the end of the strain relief right by the end cap.. i just cut the wire a little shorter drilled out old faulty wire , resoldered to the 2 wire pigtail inside pod..worked real good for a few months until the wire broke again.. i found the individual wire insulation were all cracked and im going thru same thing right now with my coil cable... ive since replaced the headphones and endcap with mal surfphones.. now I've gotta tackle replacing the coil... the headphone plug inside the pod is only 2 wires so if the problem was internal i dont think you would get any sound. ..


SubjectAuthorViewsPosted

Excal 1000 headphone problem on one side

ROBOCOP680December 17, 2017 03:19PM

Re: Excal 1000 headphone problem on one side

bootyhoundpa200January 04, 2018 03:49PM

Re: Excal 1000 headphone problem on one side

ROBOCOP233January 04, 2018 11:18AM

Re: Excal 1000 headphone problem on one side

Rick(ND)187January 04, 2018 03:36PM

Re: Excal 1000 headphone problem on one side

dewcon4414241December 21, 2017 05:42AM

Re: Excal 1000 headphone problem on one side

ROBOCOP293December 20, 2017 05:06AM

Re: Excal 1000 headphone problem on one side

surfman361December 19, 2017 07:36PM

Re: Excal 1000 headphone problem on one side

ROBOCOP200December 19, 2017 02:53PM

Re: Excal 1000 headphone problem on one side

bootyhoundpa406December 19, 2017 04:33AM

Re: Excal 1000 headphone problem on one side

dewcon4414302December 19, 2017 04:30AM

Re: Excal 1000 headphone problem on one side

ROBOCOP225December 19, 2017 04:02AM

Re: Excal 1000 headphone problem on one side

bootyhoundpa222December 18, 2017 06:13PM

Re: Excal 1000 headphone problem on one side

dewcon4414207December 17, 2017 05:07PM



Sorry, only registered users may post in this forum.

Click here to login