Findmall.com
 
 






Minelab Excalibur & Sovereign Forum


Welcome! Log In Register
Re: EXCAL 1000 DOESN'T SOUND ON DETECTION
Posted by: sullivan2002
Date: May 20, 2019 09:14AM
Quote
LawrencetheMDer
Haven't read all the replies but my Excal 1000 has wire rot w the battery cable from the battery to control unit. I have removed the cable, found both wires to be cracked and split, and in process of replacing. The 2 wires inside the cable crack and start to short/open. I also believe that the cable from the coil to the control unit, esp the cable near the control unit, also fails. One possible solution is to shorten the coil cable, when you replace the battery cable, and cut out the bad portion of coil wire near where it reaches the control board.


Sound of Threshold works good, I can increase and decrease it at will.
With a tester voltage is ok to the circuit so no bad power cable in my case. No battery problem cause I used a simple Power supply at 13.8V 5A.

I tried to replace the threshold pot without success, pot are ok

Now I don't konw what to do sincerly.

It remain, the coil, the quartz, and other components.

The strange thing is that now, never detect, at the beginning of this issue as you can see on the videsos: it detect sometimes

video: https://www.youtube.com/watch?v=o32VoqV-2js[/video] [video]https://www.youtube.com/watch?v=l5_KrrTV9Dg&t=33s


Now nothing, only the Threshold sound and nothing else,

I tested the impedance






SubjectAuthorViewsPosted

EXCAL 1000 DOESN'T SOUND ON DETECTION Video Attachments

sullivan20022080February 13, 2019 08:18AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

LawrencetheMDer115April 07, 2019 08:44PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION Jpeg Attachments

sullivan2002109May 20, 2019 09:14AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

bklein93May 27, 2019 10:51AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

sullivan200281May 28, 2019 03:56AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

bklein73May 30, 2019 09:39AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

surfman179February 13, 2019 10:09AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

Rick(ND)175February 14, 2019 03:06PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION Jpeg Attachments

bootyhoundpa176February 13, 2019 04:46PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION Jpeg Attachments

sullivan2002173February 16, 2019 12:13PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

sullivan2002154February 16, 2019 01:54PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

sullivan2002170February 13, 2019 07:21PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

Ron from Michigan174February 13, 2019 09:00PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

sullivan2002165February 14, 2019 02:47AM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION Video Attachments

sullivan2002169February 13, 2019 07:25PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

Ron from Michigan168February 13, 2019 06:57PM

Re: EXCAL 1000 DOESN'T SOUND ON DETECTION

sullivan2002185February 13, 2019 07:08PM



Sorry, only registered users may post in this forum.

Click here to login