Findmall.com
 
 






Fisher CZ Forum


Welcome! Log In Register
Coil Question
Posted by: Happy_Hour
Date: December 21, 2015 04:52PM
Coil from the 6 also work with the 6a

Re: Coil Question
Posted by: Dave J.
Date: December 21, 2015 05:53PM
electrically similar, different connectors.

Re: Coil Question
Posted by: trojdor
Date: December 21, 2015 05:59PM
If that is a question, the answer is no...different connector.

In fact, the only real difference between the 6 and 6a is the coil connector.

(Note, however, that many CZ-6 machines were converted to CZ-6a specs (original and current) connector and and aren't marked...you just have to look at the box.)

Other than the water machines, all CZ/Quicksilver coils will work with all CZ detectors...EXCEPT for the CZ-6.
(They tried out a more weatherproof connector that just didn't pan out on the 6.)

Hope this helps,
mike

Re: Coil Question
Posted by: 88junior
Date: December 22, 2015 05:14AM
The CZ6 also had a pigtail that you plugged your headphones into instead of the standard 1/4" jack.



Minelab Equinox 600 stock coil and 6" coil Plugger shaft
Minelab Explorer SE 10x12 SEF and 6x8 SEF coil
Tesoro Bandido II 8" coil 7" Mojave coil
Sunray Pro Golds and Deteknix wireless setup
Deteknix X-Pointer
Raptor 31c digger and Lesche hand digger
Whites Ground Hawg shovel
Relic and Coin hunter over 25 years!!

avatar
So, can I use a 10.5" Quicksilver coil on my CZ20?
Posted by: houndawgg
Date: April 10, 2016 05:17PM
Quote
Dave J.
electrically similar, different connectors.

It has 5 pins, although only four are used on the prongs.







Re: Coil Question
Posted by: R Mendes
Date: July 18, 2016 06:40PM
I have a CZ6a.
Which is the best coil for beach hunting (wet sand)???
Thanks

Sorry, only registered users may post in this forum.

Click here to login