Findmall.com
 
 






Fisher Classic Forum


Welcome! Log In Register
1200 series coil input
Posted by: Joseph in Alabama
Date: December 31, 2017 02:15PM
Hey Guys. was wanting to know if anyone using a 65 or 66 has/had been impressed "depth wise" ..using the 11-12 inch "Hothead" coil over the solid 11 inch or the 10-1/2 inch open coil...thanks joe

Re: 1200 series coil input
Posted by: Dave J.
Date: December 31, 2017 09:45PM
As I recall from the good old days (or bad old days, depending your perspective), the Hotheads were widely dissed.

The situation with aftermarket accessory searchcoils is better these days, with at least some of the manufacturers actually knowing what the heck they're doing and producing product they don't have to be ashamed of.

avatar
Re: 1200 series coil input
Posted by: pan4au
Date: January 01, 2018 08:55AM
I used the hot head on a Garrett and my take back then was it was hype. I never saw ant advantage in depth. I don't believe they would fared any better on the Fishers. The modern after market coils are good coils from my experience



Tn. TH'er
Nox 800
Minelab E-trac..
Fisher 1266X
Fisher F75 SE
Garrett Master Hunter 7X
Garrett Freedom II Plus
Minelab Pro-Find 35
Modded Cen-Tech pinpointer

Thanks for info..Greatly AppreciatedN/T
Posted by: Joseph in Alabama
Date: January 01, 2018 04:11PM

(This message does not contain any text.)


avatar
I recall the Hotheads being made for Kellyco by Discovery Electronics in Sweet Home, Oregon.
Posted by: vlad
Date: January 03, 2018 01:35PM
The Hotheads were slightly larger so theoretically they got more depth from that--not anything proprietary or a design design breakthrough.
They also made loops for other detector manufacturer to their specs. and names.
(I recall an article where Ron Shearer of Discovery talked about this.)

Sorry, only registered users may post in this forum.

Click here to login