Spectra V3 / V3i / VX3 Forum

Welcome! Log In Register
whites v3i
Posted by: new to this
Date: August 22, 2016 03:52AM
Hi to you all i have just got a whites metal detector and is there any one in susex are who could help me with it.
Thanks for any advice.

Re: whites v3i
Posted by: Blind Squirrel
Date: August 22, 2016 10:36AM
Howdy new to this--

I don't know about susex but you can learn a lot about your new detector by going to Youtube and typing "V3i Metal Detector". There is a plethora of instructional videos and finds videos there. Also go to the White's websight for more videos. At the top of this page there is a post titled "Links" that also can be helpful. Also, any specific questions that you may have can probably be answered here on this forum. Congratulations on your new detector! Have FUN! Best of luck and...

Happy Hunting!
Blind Squirrel

Re: whites Sussex UK...?N/T
Posted by: metalpopper
Date: October 18, 2016 06:13PM

(This message does not contain any text.)

Re: whites v3i
Posted by: Mysterdann
Date: November 18, 2016 02:49PM
This is my first time on this forum and I need some help from the V3i masters. I have had my V3i for around four years now and never been able to get a stable reading from it. Some times it works great finds the targets then two seconds later it will miss everything. I does seem to get a lot of false hits at the end of my swing. I don't think there is a short in it because it is so irregular. It may work great for 5 minutes or an hour then out of the blue it stops finding targets. I have tried different V3i coils. I have tried the stock setting and changed them every which way I can think of. It does seem to ground balance just fine and I'm usually not by any electrical interference. I have watched a ton of you tube videos and no one seems to have the same problem I do. I would be grateful for any suggestions. Thanks Dan

Re: whites v3i
Posted by: KindManTall
Date: November 18, 2016 03:56PM

Start a new thread / post you will get better help ...

Sounds like the plug in on the board is dirty Need a DR vist

White's ~MXT Pro ~ CoinMaster Classic 1 ~ CoinMaster Classic 3
Garrett~ AT Pro ~ AT Gold
Makro ~ Racer 2 ~ Gold Racer
Nokta ~ FORS CoRe ~ FORS Relic

Re: whites v3i
Posted by: shelton7522
Date: November 19, 2016 10:33AM
EMI ot you run too hot.

Re: whites v3i
Posted by: Architex
Date: March 19, 2017 01:04PM
Be sure the coil cord is not flopping around down near the coil, the coil will pick that up and false.

Sorry, only registered users may post in this forum.

Click here to login