Findmall.com
 
 






Minelab SD, GP, & GPX Classroom Forum


Welcome! Log In Register
Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 02, 2018 08:21AM
Hello guys! I don't understand if Anti Interference coiltek coil are Mono or DD... Can someone tell me?

And.. how much deep i will lost with 11 AI compared with a normal 11DD commander in relic hunting?

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 02, 2018 11:37AM
Quote
BetaGod
Hello guys! I don't understand if Anti Interference coiltek coil are Mono or DD... Can someone tell me?

And.. how much deep i will lost with 11 AI compared with a normal 11DD commander in relic hunting?

They are neither Mono or DD... Coiltek informed my its a Hybrid.

The point of an Anti Interference coil is to combat high EMI. It enables one to detect in areas otherwise not detectable with the GPX so the loss of depth is really not an issue because if the detecting area is free of EMI you will use a standard Mono or DD coil.

If you were to compare it with a like size DD coil in areas clear of EMI the DD would give more depth. I use a 14" AI coil when there is a requirement to use one and would say it gives the same depth a 11" DD coil gives in areas free of EMI.

Hope this helps....



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.



Edited 1 time(s). Last edit at 05/02/2018 11:40AM by filternozzle.

avatar
Re: Coiltek AI.. mono or dd?
Posted by: Digger70pa
Date: May 02, 2018 03:51PM
I got a 14" AI coil. It's a different animal. It changes signal responses from left swing to right swing. Meaning if your coil is swinging to the left on a high conductive target it'll sound off low high. On the swing back to the right it'll sound off high low. I found out it's the left swing response that's the correct ID of the target. It's a little confusing to me. I've used it a few times & had a little success. It also gives more than two responses over a target. I mean I'm no expert on this machine by far. I'm just now getting a grip on adjusting the machine for DD coils. A guy on this forum said to use only the left side of the coil when you get more than two tones. I haven't tried it out yet. But I could use it under power lines with out interference. HH



From The Great Appalachian Valley Minelab Fisher Teknetics Whites Garret detectors.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 02, 2018 04:15PM
so is better if a take a 14 instead of 11.. it disc?

avatar
Re: Coiltek AI.. mono or dd?
Posted by: Digger70pa
Date: May 02, 2018 04:32PM
What do you hunt for? I'm a civil war relic hunter. Depth is always what a relic hunter wants. So bigger is deeper in most situations.



From The Great Appalachian Valley Minelab Fisher Teknetics Whites Garret detectors.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 03, 2018 08:01AM
coin and relics! So i think 14 is better for me.. or both.. eheh

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 03, 2018 09:27AM
Quote
BetaGod
coin and relics! So i think 14 is better for me.. or both.. eheh

I hunt coins and the 14" is good for that, also the 14"AI being larger, will discriminate deeper than a 11"AI coil. Always take the 11" DD for areas clear of EMI.



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 03, 2018 10:49AM
What about this AI on high mineralized soil?

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 03, 2018 11:57AM
Quote
BetaGod
What about this AI on high mineralized soil?

I don't know, we don't have high mineralised soil generally this side of the pond and certainly none in my area.



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.



Edited 1 time(s). Last edit at 05/03/2018 11:59AM by filternozzle.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 03, 2018 02:58PM
i'm undecided about 14" or 17"x11" .. :confused:

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 03, 2018 04:02PM
Quote
BetaGod
i'm undecided about 14" or 17"x11" .. :confused:

Very much a personal choice...



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 04, 2018 04:28PM
Guys is impossibile to find a coiltek AI in my country.. any alternatives coils?

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 04, 2018 04:45PM
Quote
BetaGod
Guys is impossibile to find a coiltek AI in my country.. any alternatives coils?

Go to the manufacturers website and find out your nearest dealer who you can place an order with. Coiltek do not sell direct to the public.

As far as I am aware, there isn't another company selling AI coils for the GPX.



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.

Re: Coiltek AI.. mono or dd?
Posted by: BetaGod
Date: May 05, 2018 06:48AM
I searched in all europe.. no one had A.I. coils.. only one the 40x20.. really big for me!! :(

Re: Coiltek AI.. mono or dd?
Posted by: filternozzle
Date: May 05, 2018 02:44PM
Quote
BetaGod
I searched in all europe.. no one had A.I. coils.. only one the 40x20.. really big for me!! :(

Authorised dealer can order for you.



Happy Hunting
Minelab: GPX-5000, GPX-4500. Whites Pulse Scan TDI. Nexus: MP, Standard Mk II & Ultima. Nautilus: Silver King, DMC, DMC II, DMC-IIB & DMC IIBa.

Sorry, only registered users may post in this forum.

Click here to login