Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

Out of box issue!

F

Feralhousewife

New member
I am setting up my legend for first time and the screen reads CC after charging. I have tried attaching the coils and connected to computer to see if maybe requires update. The screen never changes from CC. (Trued the power button and the Up button as directed for software update.

May be putting back in the box to return. Very disappointed.

Please advise if anyone knows about this!
 
So the manual indicates that the coil connection fault, make sure plug is completely seated in the receptacle, I know this may sound odd but once you have plugged the male plug into the receptacle and screwed in the locking screw just see if you can push the plug in further and see if you can screw the locking screw any tighter, that is an issue I have found with mine, if not fastened properly and completely it will show a fault, hope that helps, good luck
oh and welcome
 
Jski2011 said:
So the manual indicates that the coil connection fault, make sure plug is completely seated in the receptacle, I know this may sound odd but once you have plugged the male plug into the receptacle and screwed in the locking screw just see if you can push the plug in further and see if you can screw the locking screw any tighter, that is an issue I have found with mine, if not fastened properly and completely it will show a fault, hope that helps, good luck
oh and welcome
Click to expand...
Thank you, I did try that as I read that online. Also tried switching coils, plugged back in to power, plugged into computer to see if update would impact. Never any waver on the CC display. The machine does not even turn off. I think it must be faulty and have sent a request to the company for support. Likely will need to return. Sad.
 
And make sure the small alignment notch in the connector matches up with the one on the control head.
Sometimes a bad piece gets through the line and out the door. Sorry
 
Feralhousewife said:
Thank you, I did try that as I read that online. Also tried switching coils, plugged back in to power, plugged into computer to see if update would impact. Never any waver on the CC display. The machine does not even turn off. I think it must be faulty and have sent a request to the company for support. Likely will need to return. Sad.
Click to expand...
So if the machine was purchased new from a local reputable dealer, or even on line I would hope and think they would take care of that without any problem or issue, so sorry you are having an issue with a new machine
I'm sure if all else fails Nokta will make it right, Nokta has an excellent reputation for customer service, good luck
 
You must log in or register to reply here.
Top