Menu
What's new
Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!

Need Support Help?

Cannot log in?, click here to have new password emailed to you

13" Ultimate Coil and Pro-Pointer Issue

L

lloyd0161

Member
I have noticed that I need to turn off my detector when using the Pro-Pointer near the Ultimate 13" coil. The Pro-Pointer starts falsing when switched on and the detector is set on the ground near to the plug I am probing. Anyone else have this issue? I have tried to switch the Pro-Pointer off and on and keeps doing this. I will try different noise cancel channels to see if resolved. Other suggestions?
 
I have the 13" as well and the X-Pointer didn't want to play well together at first. I turned the X-Pointer on and held near the coil, not too close though. Hit noise cancel and hear the pointer making different sounds as the noise cancel did it's thing. When it was done all was well and no more interference from each other.

P.S. Channel six was the magic number for me. Not sure if it will change in the future, time will tell.
 
TwistedTig3r said:
I have the 13" as well and the X-Pointer didn't want to play well together at first. I turned the X-Pointer on and held near the coil, not too close though. Hit noise cancel and hear the pointer making different sounds as the noise cancel did it's thing. When it was done all was well and no more interference from each other.
Click to expand...

I will try this next time.
 
Hello lloyde0161 I have a pro pointer as well and it does the same thing with my 12x10 SEF so all i do is move the coil away from the dug hole hope this helps :thumbup:
 
Its basicly a PI ..... thats the down side to a hand held PPer. Most will produce EMI.

Dew
 
Me too lloyde0161 but with the 12x10 or the pro coil. Especially if I have the sensitivity turned up over 24. Same deal with the X-Pointer. Noise cancel helps with the Pro Pointer but forget it with the X-Pointer which is a true PI. I have a habit now of swinging the coil well behind me as I set up to dig and flatten the coil to the ground. It's much worse with the 12x10 than the Pro Coil. I can imagine the 13" Ultimate is giving you a headache about it. They're excellent coils and just like big antennas!!! Sometimes I just take my headphones off rather than listen to all the chatter.

Ed
 
I use the 13 Ultimate on my SE Pro and I have noticed chatter when the coil and pointer are close together. My solution has been to turn the detector to the left or right from the dig sites keeping the two pin pointer and coil about 3 ft apart.

I'll try the channel adjustment to see how that works.......

The 13 U coil does well picking up targets both small and large.........

John in Va
 
Thanks guys. At least I know it's not only me having this issue.
 
You must log in or register to reply here.
Top