Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Changed email? Forgot to update your account with new email address? Need assistance with something else?, click here to go to Find's Support Form and fill out the form.

14 inch coil for nuggets?

A

Anonymous

Guest
Hi everyone
Thanks Monte for the advise on the 5 inch excellerator for nugget hunting.
I was wondering if the 14 inch excellerator would also be suitable for nuggets ( in highly mineralised areas) or is it too big and may not have the sensitivity.
Any advise would be appreciated
Thans in anticipation
StephKade
 
I have always understood that for mineralized or trashy ground you need the small coils to be able to see the good targets. If the coil is too big it is going to see too much causing you to miss the smaller targets, or any targets not very large where as the smaller coils will see these targets. If that is the case a larger coil will not see gold nuggets in highly mineralized ground like the smaller coils will..
I see this in trashy ground all the time and why we have the little mini shooter 4X6 coil as it will get into places the stock coil will not and go deeper also agaisnt even other more expensive detectors and coils working the same area. I beleive coils have to match the area you are working if you want max performance and finds.
Rick
 
Under most detecting circumstances, and average soil conditions, larger coils DO get greater depth. However, in areas of high soil mineralization, such as the western goldfields, larger coils DO "see" more soil, thus "see" more soil mineralization, therefore USUALLY require a reduction in power to be stable. If the reduction of power negates any additional depth potential with the larger coil, then you MAY be better off using the stock (i.e. smaller) coil. Hope this helps; HH jim
 
The DD coil is the best coil for hunting mineralized ground. Both the Shooter Eclipse and the 14 inch Excelerator are DD coils. If the area that you hunt is not trashy, both should handle the mineralization OK. If the area is trashy, then the smaller coil will be more effective in getting "in between" the trash. It will be more effective separating those targets within it's depth range due to the smaller footprint and less area that is being "diagnosed". The bigger coil covers more turf and also goes deeper. So it just makes sense to me that at any given time, the number of targets being located with a larger coil, good and bad, will be more plentiful than with the smaller coils. If there are lots of bad targets in the area, switch to the smaller coil to separate the good from the bad and reduce the confusion. Otherwise, use the biggest coil you can "get away with" to maximize the area you can cover in a given period of time.
 
The 14" Excelerator should do well on nuggets w/o loss of sensitivity. I had a customer do quite well in Alaska with one.
 
Without knowing where in Alaska and what size nuggets, your post don't say a thing. Some areas up there have mild ground and a few have some good sized nuggets (like Ganes Crk) although in most areas nuggets run small.
Tom
 
get one of them and check it out. <img src="/metal/html/biggrin.gif" border=0 width=15 height=15 alt=":D"> You must be curious about how it will handle your ground and what kind of sensitivity it has on those Mojave midgets.
Tom
 
Top