kaolinwasher
Well-known member
[size=large]Got out today with a new setting I like , some like to crank things up to get max depth, but it does not always give the best effect, I used a mellow , laid back backed off setting , and still got good depth three things on the Mirage will boost the depth, 1- high gain , 2 lower pulse delay- 3 faster tick on the threshold, I toned them all back as you can see i dug the good the badd & the ugly but not much foil or small Iron & the small Iron was near suface, I was surprised how deep some of the tabs where, i was getting them in the 4 to 6" range, I also swept it in the mineralized gravel and the machine was so quite i had to sweep my shoe to make shire it was on , then i hit that dime , I just love this machine , but the machine like to mock me when i find Iron , HA HA no thats the interference , - all you have to do is move the frequency knob and it shuts up just made the video to show how it sounds & performs in real world I filmed all targets as i dug about 50/50 iron non iron nothing seemed to be masked today but i was not digging any foils exempt a few thicker ones and all the small Iron was shallow [video]https://www.youtube.com/watch?v=XgUyy-8Q7L4&feature=youtu.be[/video][/size]
You have many talents and your narrating voice is one of them. You make some fantastic videos especially when you drop in these "intermission scenes" Were you hunting on your land? I could hear diesel trucks / tractors running in the background. Thanks for taking me along on your detecting adventure.