Goldstrike
Well-known member
I picked up an electrical (high impact?) plastic junction box from Home Depot for about $3 bucks. I ground and cut it down to the shape in the pic's. Nylon 'wing' bolts/screws, nut's and washers, again from Home Depot. 2 part epoxy (Home Depot)!! Drilled through the plastic box and coil, epoxy glued and screwed to the coil frame. Black spray paint is optional but finishes the repair well.
I think everything's self explanatory from the pic's and this repair has lasted more than a year on the beach, in many parks, under the SoCal sun 110F plus in the Summer! (I use the coil a lot)!! with absolutely no sign of cracking or being loose.
I hope this can help someone with a similar problem on a DD coil.
I think everything's self explanatory from the pic's and this repair has lasted more than a year on the beach, in many parks, under the SoCal sun 110F plus in the Summer! (I use the coil a lot)!! with absolutely no sign of cracking or being loose.
I hope this can help someone with a similar problem on a DD coil.