cz3d...longer shaft?

[Czhunter]

I have the cz3d, but need ideas on lengthening the shaft, or if I can buy a longer shaft for it. Its just a little short for me.....any suggestions?

 

[Dan-Pa.]

Have no knowledge of a tall mans rod for a CZ however other manufacturers make tall mans rods...Might visit a local mult line dealer and check to see if you can find a unit with a similiar bottom where the coil connects and order a tall man rod. Diameter of most lower rod top units are the same and would work if you find one with a similiar coil connector bottom..Might call Fisher and see if they do sell tall mans rods for a CZ...Pop pins do differ also and may have to modify to fit a CZ so visit your local mult line dealer as off hand don't know of a similiar one that would work.....

 

[Czhunter]

Yeah, I was looking online for a tall mans rod for the cz, but couldnt find one. I was thinking about cutting the shaft, and connecting an aluminum extension.

 

[NEBeachcomber]

I'd call Fisher and talk to someone in the parts department.
I'm almost certain they could fix you up with a "tall man" lower rod.

 

[Mr Kryptonite]

Hi,
Yes, Fisher does have a longer rod. It's called a "universal rod". It's 25 in. long and I've used these for several years on my cz's. I now use them on my Fisher F75 LTD. They should fit on most any Fisher detector. Hope this helps.

Ken