DeepTech Up On the Website

[Richard@BackwoodsDetectors]

The information that I have on the website will get us started. There are some photos of accessories lacking and their description isn't up yet.
I will do my very best to make your purchase a great experience. Thanks to All. Richard

http://www.backwoodsmetaldetectors.com/product-category/new-metal-detectors/deep-tech/

 

[Richard@BackwoodsDetectors]

[size=large]I got the site updated tonight. You will notice some changes and if you find any mistakes, please let me know. I clean carpet and sell metal detectors for a living, definitely not a computer geek. [/size]

http://www.backwoodsmetaldetectors.com/product-category/new-metal-detectors/deep-tech/

 

[Frank in NH]

Looks good Richard, have a great Thanksgiving!

 

[Sven]

Just updated my website to include your website link as the US dealer and Joe as the Service Center.

Good luck, happy hunting

 

[Richard@BackwoodsDetectors]

Thanks Very Much. Richard

 

[aguerrero56]

Richard, do you have the replacement knobs the older DTVG models need, and whats the status on super 6 coils?

 

[Richard@BackwoodsDetectors]

I don't have the knobs but will be ordering the Super Sixs this week. Very popular coil.. Thanks Richard

 

[aguerrero56]

Is there anyway to special order the knobs from Deeptech? I wouldn't even know where to begin my search to find some that will work. If anyone knows a replacement please let me know.

 

[Sven]

I have a source for the knobs but, they were slighty larger in dia. so one wrap of some foil tape on the pot shaft helped snug it up before tightening.
The pot shafts are plastic.

I ordered 6mm, so a 5.5mm size would be a better fit if you can find them.

http://diy-tubes.com/index.php?route=product/search&filter_name=elma%20ritel

Comes in different colors, order a few different color sets and you can swap pointer base, knob and tops around.

Priced inexpensive and shipping is about $8.00 all the way from Russia. Sometimes shipping is slow, holiday season, you may have to wait 15-30 days.

 

[aguerrero56]

I have a source for the knobs but, they were slighty larger in dia. so one wrap of some foil tape on the pot shaft helped snug it up before tightening.
The pot shafts are plastic.

I ordered 6mm, so a 5.5mm size would be a better fit if you can find them.

http://diy-tubes.com/index.php?route=product/search&filter_name=elma%20ritel

Comes in different colors, order a few different color sets and you can swap pointer base, knob and tops around.

Priced inexpensive and shipping is about $8.00 all the way from Russia. Sometimes shipping is slow, holiday season, you may have to wait 15-30 days.

Thanks for this info. I'm having trouble opening that link. I'll try it again on my pc when I get home but at least I know what diameter to look for, thanks again. Agustin

 

[RG-DeepTech]

Hi, it's not necessary to search here or there replacement knobs Joe from DeepTech service center have in stock knobs for replacement - from the two models what we use. So, contact with him on: deeptech@neaservice.net
If Richard want such knobs, will send to him too

 

[Sven]

Richard when he has them in stock. You won't have to wait until after Christmas for them to arrive. My source ships from Russia.

I opted back in July to find a cheaper source than buy direct from Deeptech, the cost plus shipping, plus the low Canadian dollar value,
made the total cost way too high. It was going to cost me in the end about $8 or $9 a knob.