Minermangold
New member
Here are 2 simple mods you can do in no time. First for my XL PRO i needed to keep the control knobs from 'drifting" where i set them so i used a small rubber band
(hair rubber bands or rubber bands for braces) to provide more resistance than o-ring at knob. Because as you know setting sig.balance and tuner control are to be as precise as you can set them,this will "hold " position much eaiser.
Of course,This can be done to other detector models.
The second mod is a simple sling harness you can build. I used a strap from a laptop case,but but you can use guitar strap also.
the rubber rings are Hair (ponytail) bands. using this will help keep your detector scratch free. ENJOY
(hair rubber bands or rubber bands for braces) to provide more resistance than o-ring at knob. Because as you know setting sig.balance and tuner control are to be as precise as you can set them,this will "hold " position much eaiser.
Of course,This can be done to other detector models.
The second mod is a simple sling harness you can build. I used a strap from a laptop case,but but you can use guitar strap also.
the rubber rings are Hair (ponytail) bands. using this will help keep your detector scratch free. ENJOY
