I've noticed that the pinpointer on my Eurotek Pro nulls quite a bit and that I will have to release the button and try again sometimes more than once. It's really not that much of a problem because it is really easy to pinpoint without the pinpointer, but it is annoying when trying to check a deeper target. Was just wondering if anyone else was having this problem. I really love this detector and would like to know why this is happening. Thanks
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Eurotek Pro Pinpointer Nulls
- Thread starter pine3874
- Start date
In most soils, if you push the button and then lift the searchcoil, the audio threshold will drop out with a consequent loss in sensitivity to targets. And if you push the button and then lower the searchcoil, the audio volume will increase.
I'm guessing that this is what you're observing. It's normal for machines that don't have manual or computer-assisted ground phase balance adjustment.
--Dave J.
I'm guessing that this is what you're observing. It's normal for machines that don't have manual or computer-assisted ground phase balance adjustment.
--Dave J.
Digger70pa
Well-known member
You could be trying to pinpoint too close to the target or are over a target that is close by. I know when you pinpoint close to the target it desensitizes the machine. HH