Excalibur 1000 underwater setting help ??

[braich77]

HI all

I need a professional advise please on a best Excalibur 1000 setting (older model with a yellow headphone) for a underwater shallow ocean water up to 5 feet. my settings are inpoint, theohold is to silence, volume up, sensitivity is 1 clock.
with this setting i am finding targets but mostly not too deep, oi know i can get deeper with this great machine

 

[JOHNMARKHAM]

Humm well here goes :
I run in disc mode
threshold just bearley audible
vol about 3/4
sens from 9-12 o'clock depending if I'm on dry sand or wet sand in water or not
discrimination at about 3 this depends on how much trash is there!
This has worked fine for me !
If you go into water clean sand out from under skid plate as this will cause you to get faulse siginals
hope this helps
good luck
John

 

[kered]

Disc 3 will cut out fine gold rings, better Zero disc, i have a couple that break up on 2(very fine) (in air)

 

[Joe of South Jersey]

The settings you have are very close......

The sens. should be about the 11 or 12 o'clock postion.

I would also move the treshold up just a bit.....you want it to be just audible.

Hope this helps.