Disc. setting notch set to allow nickels but when I get a reading in that range its a pulltab and the pulltab setting is notched out. I'n must not understand something. using the 3 tone setting, so I switched to all metals still getting tabs on the nickel ID. and have found a nickel yet. Can't believe there's no nickels anywhere i'm hunting. Let me make it more clear, Disc iron, foil, allow nickels Disc tabs. Also the Iron and foil still give an audio but the numbers are low and the sound is lousy, thought it would be silent like my 1270 " Disc it and you won't hear it. Plus the high tone pings alot with a high number but go to p/point it and no audio response. could the SEN. be to hight and this is in BP mode. SEN is 30. Or could it be the 11 inch coil in trashy area.the ID and nubers don't seem to match, reading 30, 3 inches, confidence all the way and its a tab. Any help, only my third using it so I realize its different from my 1270. on the high pings I look for constant pings but sometimes i'll get 2 or 3 good audio sound and then it will change to a low tone? I like the All metal mode but you have to watch the numbers, the high numbers are dead on the money for the TID and the depth is just about on.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
F75 LTD Disc Questions
- Thread starter shooter
- Start date