Coinstrike in good working condition with factory 8" coil on lower rod, and additional 6" coil on lower rod,chest mount plate,web printed instructions. The faceplate has an internal "smudge" dead center on the screen,there is also an external scratch at the 3:15 position on the screen. the screen is still very readable,and the backlight function still works. The biggest problem is that most of the insulation on the 8" coil wire has peeled away(common CS problem) and has been replaced with heat shrink tubing and electric tape. The 8"coil still works fine ,but is not chest mountable. There are no problems with the 6" coil as it is fairly new.This was my relic machine,as it i.d.s targets in all metal mode. $175 shipped lower 48 only. Thanks.