Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Gary's Sifter program

vikingvic

New member
Are there many changes to install Gary's Sifter program in V4 from what it was in V3.2/
 
Sensitivity 86
Ground 88
Audio response 4
That should do the job.
Please feel free to experiment with different variations its always interesting to hear your thoughts.
Many thanks
Gary
 
Having seen very little change in ground conditions in the UK when we were over there . . .GB of 88 to 90 covers the bulk of the sites.

In the States, I have seen it range from 93 down to 65 . . . in fact at the Bootcamp last weekend it changed by 15 points from one side of the site to the other.

If the two numbers diverge and you are in Manual GB, the machine will start to tell you an adjustment is needed

Andy
 
If using full tones you can still run disc at -6.4 in V4
Disc at 1 if you dont want to hear ground feedback.
Disc at 5 if you dont want to hear most iron.

So now with the minus discrimination you have a wide range of adjustments to help fine tune your machine.
 
Top