Gold scan 4

[rtola]

Where can I get info, owners manual for a Gold Scan 4 metal detector?

 

[Draco]

TECHNICAL SPECIFICATIONS​

OPERATING SYSTEM - PULSE INDUCTION:

450 - 550 pulses per second depending on FREQ. control setting.

ELECTRONICS:

The electronics of the detector are divided into two parts; the main transmitter/receiver in the front box and the power supply and audio circuits in the rear box under the armrest. Both boxes are sealed against ingress of water and sand or dust but must not be submerged. The printed circuit boards are computer designed to give maximum reliability and miniaturisation. Only the best high specification components are used and the circuits are subjected to three stages of testing plus a burn in period to ensure the performance is stabilised and is consistent between detectors. The output indication is both visual on a meter and audible on speaker or phones. The headphones plug into a jack socket on the battery box and a unique sensing circuit cuts out the speaker in the main electronics when the plug is inserted.

SEARCH LOOPS:

The search loops are available in two sizes:- 11 " (280mm) and 8" (200mm) plus a 3/4" probe permanently wired in and switched into use as required. Both loop sizes incorporate a double electrostatic shield to eliminate capacitive effects on a wet beach. Loops and probe are fully water proof and can be submerged. Loop connectors are sealed weatherproof types.

BATTERY SYSTEM:

The GOLDSCAN is powered by a belt mounted 15V battery pack unit incorporating nickel-cadmium rechargeable cells. The cells are charged in situ by plugging the charger output jack into the headphone socket. The battery pack can be replaced easily by the user. Fault protection is by means of a fuse on the battery unit. The battery unit is connected to the main electronics via a coiled extension lead. This is sufficient for the detector to be placed on the ground while the user is standing upright and digging with a full size spade As the phones plug into the battery box these do not have to be removed while digging.

BATTERY LIFE:

The capacity of the batteries is such that the GOLDSCAN will operate for 8-10 hours on a full charge. To re charge using the mains charger requires 12 - 14 hours. It is not possible to overcharge using the chargers supplied.

SHAFT ASSEMBLY:

The shaft consists of a lightweight anodised aluminium armsaver assembly which is adjustable in length by means of a locking telescopic collar. The bottom 9" of the lower shaft is of rigid plastic material to avoid excessive signal levels due to the proximity of shaft and loop.

WEIGHT:

Shaft mounted electronics plus 11" search loop 3.5 lbs. (1.6 kg) Belt mounted battery pack .3.0 lbs (1.5 kg)

KIT:

Consists of shaft mounted electronics with built in probe, belt mounted battery unit, mains battery charger, 11" and 8" search loop, operating instructions.

 

[Draco]

Account Suspended

 

[rtola]

TECHNICAL SPECIFICATIONS​

OPERATING SYSTEM - PULSE INDUCTION:

450 - 550 pulses per second depending on FREQ. control setting.

ELECTRONICS:

The electronics of the detector are divided into two parts; the main transmitter/receiver in the front box and the power supply and audio circuits in the rear box under the armrest. Both boxes are sealed against ingress of water and sand or dust but must not be submerged. The printed circuit boards are computer designed to give maximum reliability and miniaturisation. Only the best high specification components are used and the circuits are subjected to three stages of testing plus a burn in period to ensure the performance is stabilised and is consistent between detectors. The output indication is both visual on a meter and audible on speaker or phones. The headphones plug into a jack socket on the battery box and a unique sensing circuit cuts out the speaker in the main electronics when the plug is inserted.

SEARCH LOOPS:

The search loops are available in two sizes:- 11 " (280mm) and 8" (200mm) plus a 3/4" probe permanently wired in and switched into use as required. Both loop sizes incorporate a double electrostatic shield to eliminate capacitive effects on a wet beach. Loops and probe are fully water proof and can be submerged. Loop connectors are sealed weatherproof types.

BATTERY SYSTEM:

The GOLDSCAN is powered by a belt mounted 15V battery pack unit incorporating nickel-cadmium rechargeable cells. The cells are charged in situ by plugging the charger output jack into the headphone socket. The battery pack can be replaced easily by the user. Fault protection is by means of a fuse on the battery unit. The battery unit is connected to the main electronics via a coiled extension lead. This is sufficient for the detector to be placed on the ground while the user is standing upright and digging with a full size spade As the phones plug into the battery box these do not have to be removed while digging.

BATTERY LIFE:

The capacity of the batteries is such that the GOLDSCAN will operate for 8-10 hours on a full charge. To re charge using the mains charger requires 12 - 14 hours. It is not possible to overcharge using the chargers supplied.

SHAFT ASSEMBLY:

The shaft consists of a lightweight anodised aluminium armsaver assembly which is adjustable in length by means of a locking telescopic collar. The bottom 9" of the lower shaft is of rigid plastic material to avoid excessive signal levels due to the proximity of shaft and loop.

WEIGHT:

Shaft mounted electronics plus 11" search loop 3.5 lbs. (1.6 kg) Belt mounted battery pack .3.0 lbs (1.5 kg)

KIT:

Consists of shaft mounted electronics with built in probe, belt mounted battery unit, mains battery charger, 11" and 8" search loop, operating instructions.

Account Suspended

Thank you, for the info. It's very helpful.

Where can I get info, owners manual for a Gold Scan 4 metal detector?

T