I recently talked with Mike from VA. Beach about hunting a new site. An old mill from the 1700's, but I can't get my ExpII to settle down. Tried turning sens down to 18 and I.M.to -6. I still get high silver chirps every swing anywhere fron 3-6, but nothing consistent, the hits are all over the screen. But most far right. The ground is like black sand lots of pebbles and stones and a high iron content. It is next to a big stream. I'm digging all these signals and coming up with nothing, I'm blowing it!
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
I need help!!!
- Thread starter YOGIPA
- Start date
James N.D.
New member
Are you using a smaller coil? If not, that is part of the problem. An 8" search coil might work better and maybe a 5" would better yet. If there is that much iron in the ground, you might have to go and try using ferrous tones. Try turning the gain down to 8 or 7 also. And don't forget to noise cancel. Also, try to see which will work better for the stability of the detector, manual or semi-auto. If I think of anything else I'll post again and I hope some of what I posted helps the next time out. Also, you could try the Joey coil. Good Luck!!