A
Anonymous
Guest
If not should I be looking at the Garreth or a Deepstar, the aquastar is just to expensive unless I can pick up a seccond hand unit. Is there and other modles out there with reverse disc.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
A
Anonymous
Guest
The Aquastar & the Deepstar do not reverse discriminate like the Goldquest SS does.
For reverse discrimination requirements, the Goldquest SS is the one to choose. <IMG SRC="/forums/images/smile.gif" BORDER=0 ALT="
">
Mr. Bill
For reverse discrimination requirements, the Goldquest SS is the one to choose. <IMG SRC="/forums/images/smile.gif" BORDER=0 ALT="
">Mr. Bill
A
Anonymous
Guest
.. this is done with the GSS, ie with which control? I am not that fimilar with Pi detectors, but I cant see how can be done with SAT. Treshold(Is it the same as treshold on vlf units) or frequency control.
A
Anonymous
Guest
You would use the pulse delay/frequency control.
Adjusting this control on the Goldquest SS, adjust many different functions in the circuitry besides pulse delay. This control will allow the unit to be re-tuned toward selective metals, thus making it more responsive to it. If you had it tuned for small jewelry and you were to retard the delay control, and the target dropped out, experience with use will allow you to have a good guess as to dig or not.
For the most part retarding this control has little affect on the depth of the target under the coil if the signal remains. This is unlike most PI detectors with just a pulse delay control, retarding it usually causes great loss in depth.
This reverse discrimination is not something one would do to ID all your targets. It really works it
Adjusting this control on the Goldquest SS, adjust many different functions in the circuitry besides pulse delay. This control will allow the unit to be re-tuned toward selective metals, thus making it more responsive to it. If you had it tuned for small jewelry and you were to retard the delay control, and the target dropped out, experience with use will allow you to have a good guess as to dig or not.
For the most part retarding this control has little affect on the depth of the target under the coil if the signal remains. This is unlike most PI detectors with just a pulse delay control, retarding it usually causes great loss in depth.
This reverse discrimination is not something one would do to ID all your targets. It really works it