Making A Come Back and Need Help on New Detector

[Jerry-Iowa]

Hi everyone, I have been treasure hunting for about 13 years and out of it for the past 3 years but ready now to get down and dirty again. I have used nothing but Garrett detectors GTA 500, GTAx 1000 and Master Hunter, but now would like to switch to Fisher hoping to gain a little more depth. What I need is an all around detector and really was looking at the CZ-3D or the new Coin Strike. What I have read about these machines I should pickup on using them right away with the exception of setting the ground balance on the CZ-3D, I

 

[Anonymous]

n/t

 

[Anonymous]

For $100 more than the EDGE, you can get a CZ-70Pro. The CZ-70 Pro I prefer over the 3D, because of the large meter and being backlit, and I believe it is a little hotter. Now the CZ will put the ball out of the ballpark, but if you get the 10" loop and run VERY low iron discrimination, if the ball is not out, its "at the wall", with the EDGE. True, the EDGE does not have ground tracking like the C$, but you can just rebalance when needed at the press of a button. And the EDGE will give you finesse TID-when you can tell the difference between a clad dime and a silver dime [in many cases]you have a detector that is made for hunting trash.

 

[Jerry-Iowa]

Thanks for the help Vlad, I just checked on the ID EDGE at a dealer who has that detector for $599.95 what I have read in the specs I like.