So I have a minelab x-terra 305 and really need to figure out how to hard-wire the coil to the control box...I have no idea which wires go where because the male and female connections have been removed (long story)...I'll try to attach some pics so you can understand my dilemma better...but basically the control box has 6 wires (blue, red, yellow, black, grey, green) but the coil has 8 (brown, brown/white, blue, blue/white, green, green/white, yellow, yellow/white)...I have hunted the internet and the only thing I can find is which color wire from the control box goes to each pin on the connector
pin 1 Blue
pin 2 yellow
pin 3 green
pin 4 Black
pin 5 red
pin 6 grey
But that doesn't exactly help me much...here are a couple pics...i hope I've explained everything ok....let me know if you have any questions for me...thanks so much in advance!
pin 1 Blue
pin 2 yellow
pin 3 green
pin 4 Black
pin 5 red
pin 6 grey
But that doesn't exactly help me much...here are a couple pics...i hope I've explained everything ok....let me know if you have any questions for me...thanks so much in advance!
