MXT Problem??

[Anonymous]

Have anyone had this problem with their MXT?
The MXT would seem to just freeze up. I could still hear the threshold hum, but no VDI information or other sounds. I actually put a dime on the ground and the MXT would not detect it. I was using the mini-shooter coil and using the preset settings (coin mode) with a slight hum threshold.
The batteries are good. I also checked all connections.
This has happened to me at least three times in the last month.
If I turn it off and then back on, it will work.
Any suggestion or comments would be appreciated.
Oak
PS

 

[Anonymous]

Sounds Like A Defective Machine! I've Never had that Problem! Yeah! I would just let Whites know about it, And if your warrenty is still good Im sure they will be more than happy to fix or Replace it! <img src="/metal/html/smile.gif" border=0 width=15 height=15 alt="">

 

[Anonymous]

With the machine on, pull the batteries out. Turn off
and put batterys back in. Works for DFX. Richard

 

[Anonymous]

Richard, I had the same thing happen Sunday for the first time with the shooter coil. I messed around, turned it off and on and got it going. Used the stock coil tonight and everything is ok. Go figure. . . .

 

[Anonymous]

[No message]