C
calabash digger
Guest
I use 3 programs with minor tweaks first program is a deep program but its still pretty fast.
sens 90-93 tx2-3 I run mine on 90 and tx 2 most of the time but will bump it up for really deep targets but I like the calmness of the lower settings.
reactivity 2 silencer 0 I never go below 2 on reactivity ,12 kh, full tones, iron vol 0, discrim 1, and notch nothing. audio responce 5. ground balance is key I manually ground balance my machine to the actual gb number and if you want it to go deeper you neg ground balance a couple points but it makes it run a little more unstable. I use this program for general relic hunting in moderate iron. I WILL HAVE A VIDEO UP OF THE DEUS HITTING A 14 INCH SILVER QUARTER AND A 15 INCH SILVER HALF WITH THESE SETTINGS.
Next
my heavy iron . FULL TONES, SENS 86 TX 1,REACTIVITY 3 OR 4 DEPENDS ON THICKNESS OF IRON SILENCER -1 AND ZERO DISCRIM GROUND BALANCE 88 AND THE REST IS THE SAME AS THE DEEP PROGRAM.
to make the 3rd program just change the sens to 90 and the tx to 2 and you have a deeper seeking trash program.
Relic hunting im in thick iron alot when im on a house foundation BUT WHEN I MOVE OUT AWAY FROM THE THICKEST I change to my deep program and sometimes when its moderate to thick I run the deeper version of the trash program looking for the deeper masked targets. These 3 programs have served me well so far , dont be miss lead the deep program is still fast with the reactivity on 2 so if there are a few nails around dont worry about switching , experiment with these and tweak them to your liking. I was always worried when to switch from the heavy iron programs to the deep but you will learn with practice when to switch and worse case you can always go back over the spot to see if you missed anything.
sens 90-93 tx2-3 I run mine on 90 and tx 2 most of the time but will bump it up for really deep targets but I like the calmness of the lower settings.
reactivity 2 silencer 0 I never go below 2 on reactivity ,12 kh, full tones, iron vol 0, discrim 1, and notch nothing. audio responce 5. ground balance is key I manually ground balance my machine to the actual gb number and if you want it to go deeper you neg ground balance a couple points but it makes it run a little more unstable. I use this program for general relic hunting in moderate iron. I WILL HAVE A VIDEO UP OF THE DEUS HITTING A 14 INCH SILVER QUARTER AND A 15 INCH SILVER HALF WITH THESE SETTINGS.
Next
my heavy iron . FULL TONES, SENS 86 TX 1,REACTIVITY 3 OR 4 DEPENDS ON THICKNESS OF IRON SILENCER -1 AND ZERO DISCRIM GROUND BALANCE 88 AND THE REST IS THE SAME AS THE DEEP PROGRAM.
to make the 3rd program just change the sens to 90 and the tx to 2 and you have a deeper seeking trash program.
Relic hunting im in thick iron alot when im on a house foundation BUT WHEN I MOVE OUT AWAY FROM THE THICKEST I change to my deep program and sometimes when its moderate to thick I run the deeper version of the trash program looking for the deeper masked targets. These 3 programs have served me well so far , dont be miss lead the deep program is still fast with the reactivity on 2 so if there are a few nails around dont worry about switching , experiment with these and tweak them to your liking. I was always worried when to switch from the heavy iron programs to the deep but you will learn with practice when to switch and worse case you can always go back over the spot to see if you missed anything.