Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Over Load Signals

all iron

Member
Out today ( what a beautiful day in Indiana ) Summer is almost here !!
Searced a hill that folks sled down and found a few things

1. A coin / token that says C & C on one side and 5 on the other ( seems old ) This was a very faint singnal coming in and bouncing around from 68 to 85 / 9 inches deep by the time i found it

2. a large Tungsten carbide steel ring ( overloaded at 61 ) i actually walked away but something pulled me back. It must have been right under the surface.

3. The rollex watch i found a few days ago ( fake ) :rolleyes: also overloaded at 99 but i dug it also and to my suprise
 
What machine are you using???
 
All Overloads are not bad targets right ?
 
So far, any overload signals I have had on my Omega was from surface trash, to 2 inches deep the size of a bottom of an old can or larger but this is using the stock 10" eliptical coil.
 
I tend to get those signals alot myself, when I do I stop and raise the coil over the target to see if i can get a good reading 99.5% of the time I don't get anything with the coil a couple of inches off the ground so figure its a big piece of iron or something else that I've got disc'd out.
 
Ground Phase setting for your nice-weather piece of Indiana was ??? It's just interesting to know what others get to deal with in the way of ground mineralization and settings required.

I always make a quick sweep with a slightly raised coil to challenge an 'over-load' response. Most often it is a larger size target or one too close to the search coil. That's why I like to hunt with the coil about 1" to 1
 
Monte, what does the ground phase tell you about the soil
What is the significants of a certain number? anything at all?
 
I use the f5 and I look at the overload signals as my machine telling me that it is over an object that is masking all other targets for about a 2 feet diameter circle,depending on size of object maybe more. If I'm in a location with possibly some deep old finds I dig all overloads if I can .Have found a big percentage of my old coins and jewelry under or close to a flattened can or other metal. Just something to consider.
 
Ken: Twenty to twenty five % of the overload signals that I have experienced on the F-5 and Omega have been coins that were on the surface, under the grass, or one inch or less deep. Usually they are quarters, halves, or recent dollar coins, however have had dimes cause an overload twice, it is worth lifting the coil a few inches and swinging over the target to find out. Steve
 
Sweet!!!
 
Top