Mississippi
New member
Is the X marks the spot? Front of the coil, half way down the coil or the middle of the coil. Just got one last week and trying to figure it out. Thanks.
Find's Treasure Forums
Welcome to Find's Treasure Forums, Guests!
You are viewing this forums as a guest which limits you to read only status.
Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.
Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.
Click here to register!
Need Support Help?
Cannot log in?, click here to have new password emailed to you
Pinpointing with Safari stock coil. Were
- Thread starter Mississippi
- Start date
Goldstrike
Well-known member
I also have a Safari and use the 'wiggle' technique that Andy Sabisch describes in his book "Mastering the Minelab Quattro" chapter 3 (p23) There are other techniques he describes that deal with this subject and is well worth the read!
reltolbert
New member
Generally speaking, the X marks the target.
Mississippi
New member
What part of the coil is most sensitive?
reltolbert
New member
The center part of the coil from the bottom edge to the top edge is a narrow strip that is the most sensitive part of the coil.
Once you get a target, refer to page 24 of your Safari manual on how to pinpoint your target exactly.
Once you get a target, refer to page 24 of your Safari manual on how to pinpoint your target exactly.
I had a hard time pin pointing (pp) when I started. Seemed like the target would always be at the edge of my plug. I now wiggle to pp and then turn 90 degrees out and wiggle again. I then turn back 90 degrees to narrow it down even more. I seem to be centered a lot more since I started doubling back. The first pp the target could be anywhere on the 11 inch diameter. By going back you cut it down to the center. Did I explain that coherently?
Good luck,
Good luck,
Look thru the coil at object(weed,rock,stick,etc or place golf tee.Use that as your focal point is it locating more right or left up or down from that point adjust as needed after a while it will come to you and you will center with no problem detune if you can.I use this for other hot coil detector brands also.