Find's Treasure Forums

Welcome to Find's Treasure Forums, Guests!

You are viewing this forums as a guest which limits you to read only status.

Only registered members may post stories, questions, classifieds, reply to other posts, contact other members using built in messaging and use many other features found on these forums.

Why not register and join us today? It's free! (We don't share your email addresses with anyone.) We keep email addresses of our users to protect them and others from bad people posting things they shouldn't.

Click here to register!



Need Support Help?

Cannot log in?, click here to have new password emailed to you

Racer did something that impressed me .

kaolinwasher

Well-known member
I did a test using a mineralized granite Cobble the stone is about 9 inches long and 4.5"x4.5" i ground balanced on it and it GB at 87. no detector yet has got thru this one in disc very well i put a nickel under it and using the small OOr coil in two tone sense 75 i got the high tone both ways, my other two tone machine would only low tone . I found myself saying. this machine is different. I tried the three tone at 85gain and had to slow the sweep and only got it one way so the two tone has an edge in the minerals
 
I just got my Racer today and am very anxious to give it a go.Detecting here is done for a while due to recent snow today.That was a very interesting test you performed I'm going to have to give that a try.Thanks for sharing.
 
kaolinwasher said:
I did a test using a mineralized granite Cobble the stone is about 9 inches long and 4.5"x4.5" i ground balanced on it and it GB at 87. no detector yet has got thru this one in disc very well i put a nickel under it and using the small OOr coil in two tone sense 75 i got the high tone both ways, my other two tone machine would only low tone . I found myself saying. this machine is different. I tried the three tone at 85gain and had to slow the sweep and only got it one way so the two tone has an edge in the minerals
1.. The stone measured 9" Long, 4½" Wide, and was 4½" Thick, correct?

2.. Was the nickel placed under the rock, dead center or close to the edge?

3.. Sensitivity [size=small](Gain)[/size] was '75' in 2-Tone and '85' in 3-Tone, right? [size=small](Remember the two modes work differently and the 2-Tone, by design, has more power than 3-Tone.)[/size]

4.. What were the ID Filter [size=small](Discrimination)[/size] settings used?

Thanks,

Monte
 
Sounds impressive Gunnar! Would you be able to provide a video demonstration?
 
the nickel was placed right in the center. I.D filter 10 - and Gainof 75 & 85
 
VIDEO OF THE EVENT the Fact that the racer got any signal is very good , with the I,D filter @ 10 i know if the Id filter is at 0 you get a low tone with an aocasianal high -My Vista Gold only made a low tone on this and it is a two tone machine hear is the Video[video]https://www.youtube.com/watch?v=CRDdk07bwa0[/video]
 
Top